page margins thesis

• Graduate School
• Current Students
• Dissertation & Thesis Preparation

Formatting Requirements

Page layout, margins and numbering.

Your scholarly approach may call for a different presentational method. These are the requirements and recommendations for text-based theses.

For a text-based thesis, or the text portions of a thesis, the page size must be 8.5" x 11", and the text must be in a single, page-wide column. Do not use two or more columns in your thesis.

The text of the thesis is written in paragraph form.

• the first line of each paragraph should be indented, OR
• there should be a larger space between paragraphs than there is between lines.

Each chapter should generally start at the top of a new page.

Left: 1.25 inches (32 mm) is recommended if you intend to bind copies of your thesis; 1 inch minimum.

Right, top, and bottom: 1 inch recommended; 0.75 inches (19 mm) minimum

Page Numbering

Preliminary pages:.

• must be numbered in lower case Roman numerals (ii, iii, iv, etc.)
• the title page is "i" but this number must not appear on the page
• numbering begins at "ii" on the committee page
• the first page of the abstract is page iii

Body of thesis:

• must be numbered in Arabic numerals (1, 2, 3, etc.)
• the first page of the text is "1"
• subsequent pages are numbered continuously throughout, including pages with tables and figures, bibliographies, appendices, and index

Whole thesis:

• every page except the title page must have a number on it
• there must be no blank pages in the thesis.

Page numberS:

• must be placed at least .5 inches (12 mm) from the edge of the page
• may be either in the lower centre or on the top or lower right of the page, when the page is viewed in portrait view. Lower right is preferred.

Landscape Pages

Landscape pages must be orientated in your PDF so that they are readable without rotation. You do not need to change the location or orientation of the page number, but may if you wish.

Facing Pages

Facing pages are not acceptable; you must use one-sided layout and pagination. If the caption for a figure, table, etc., cannot appear on the same page as its accompanying illustration, place the illustration on a separate page after the caption.

• Why Grad School at UBC?
• Graduate Degree Programs
• Application & Admission
• Info Sessions
• Research Supervisors
• Research Projects
• Indigenous Students
• International Students
• Tuition, Fees & Cost of Living
• Newly Admitted
• Student Status & Classification
• Student Responsibilities
• Supervision
• Managing your Program
• Health, Wellbeing and Safety
• Professional Development
• Final Doctoral Exam
• Final Dissertation & Thesis Submission
• Life in Vancouver
• Vancouver Campus
• Graduate Student Spaces
• Graduate Life Centre
• Life as a Grad Student
• Graduate Student Ambassadors
• Meet our Students
• Award Opportunities
• Award Guidelines
• Minimum Funding Policy for PhD Students
• Killam Awards & Fellowships
• Dean's Message
• Leadership Team
• Strategic Plan & Priorities
• Vision & Mission
• Equity, Diversity & Inclusion
• Initiatives, Plans & Reports
• Graduate Education Analysis & Research
• Media Enquiries
• Newsletters
• Giving to Graduate Studies

Strategic Priorities

• Strategic Plan 2019-2024
• Improving Student Funding
• Promoting Excellence in Graduate Programs
• Enhancing Graduate Supervision
• Advancing Indigenous Inclusion
• Supporting Student Development and Success
• Reimagining Graduate Education
• Enriching the Student Experience

Initiatives

• Public Scholars Initiative
• 3 Minute Thesis (3MT)
• PhD Career Outcomes

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction
• Copyright Page
• Dedication, Acknowledgements, Preface (optional)
• Table of Contents
• List of Tables, Figures, and Illustrations
• List of Abbreviations
• List of Symbols

Non-Traditional Formats

Font type and size, spacing and indentation, tables, figures, and illustrations, formatting previously published work.

• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

II. Formatting Guidelines

All copies of a thesis or dissertation must have the following uniform margins throughout the entire document:

• Left: 1″ (or 1 1/4" to ensure sufficient room for binding the work if desired)
• Right: 1″
• Bottom: 1″ (with allowances for page numbers; see section on Pagination )
• Top: 1″

Exceptions : The first page of each chapter (including the introduction, if any) begins 2″ from the top of the page. Also, the headings on the title page, abstract, first page of the dedication/ acknowledgements/preface (if any), and first page of the table of contents begin 2″ from the top of the page.

Non-traditional theses or dissertations such as whole works comprised of digital, artistic, video, or performance materials (i.e., no written text, chapters, or articles) are acceptable if approved by your committee and graduate program. A PDF document with a title page, copyright page, and abstract at minimum are required to be submitted along with any relevant supplemental files.

Fonts must be 10, 11, or 12 points in size. Superscripts and subscripts (e.g., formulas, or footnote or endnote numbers) should be no more than 2 points smaller than the font size used for the body of the text.

Space and indent your thesis or dissertation following these guidelines:

• The text must appear in a single column on each page and be double-spaced throughout the document. Do not arrange chapter text in multiple columns.
• New paragraphs must be indicated by a consistent tab indentation throughout the entire document.
• The document text must be left-justified, not centered or right-justified.
• For blocked quotations, indent the entire text of the quotation consistently from the left margin.
• Ensure headings are not left hanging alone on the bottom of a prior page. The text following should be moved up or the heading should be moved down. This is something to check near the end of formatting, as other adjustments to text and spacing may change where headings appear on the page.

Exceptions : Blocked quotations, notes, captions, legends, and long headings must be single-spaced throughout the document and double-spaced between items.

Paginate your thesis or dissertation following these guidelines:

• Use lower case Roman numerals (ii, iii, iv, etc.) on all pages preceding the first page of chapter one. The title page counts as page i, but the number does not appear. Therefore, the first page showing a number will be the copyright page with ii at the bottom.
• Arabic numerals (beginning with 1, 2, 3, 4, etc.) start at chapter one or the introduction, if applicable. Arabic numbers must be included on all pages of the text, illustrations, notes, and any other materials that follow. Thus, the first page of chapter one will show an Arabic numeral 1, and numbering of all subsequent pages will follow in order.
• Do not use page numbers accompanied by letters, hyphens, periods, or parentheses (e.g., 1., 1-2, -1-, (1), or 1a).
• Center all page numbers at the bottom of the page, 1/2″ from the bottom edge.
• Pages must not contain running headers or footers, aside from page numbers.
• If your document contains landscape pages (pages in which the top of the page is the long side of a sheet of paper), make sure that your page numbers still appear in the same position and direction as they do on pages with standard portrait orientation for consistency. This likely means the page number will be centered on the short side of the paper and the number will be sideways relative to the landscape page text. See these additional instructions for assistance with pagination on landscape pages in Microsoft Word .

Format footnotes for your thesis or dissertation following these guidelines:

• Footnotes must be placed at the bottom of the page separated from the text by a solid line one to two inches long.
• Begin at the left page margin, directly below the solid line.
• Single-space footnotes that are more than one line long.
• Include one double-spaced line between each note.
• Most software packages automatically space footnotes at the bottom of the page depending on their length. It is acceptable if the note breaks within a sentence and carries the remainder into the footnote area of the next page. Do not indicate the continuation of a footnote.
• Number all footnotes with Arabic numerals. You may number notes consecutively within each chapter starting over with number 1 for the first note in each chapter, or you may number notes consecutively throughout the entire document.
• Footnote numbers must precede the note and be placed slightly above the line (superscripted). Leave no space between the number and the note.
• While footnotes should be located at the bottom of the page, do not place footnotes in a running page footer, as they must remain within the page margins.

Endnotes are an acceptable alternative to footnotes. Format endnotes for your thesis or dissertation following these guidelines:

• Always begin endnotes on a separate page either immediately following the end of each chapter, or at the end of your entire document. If you place all endnotes at the end of the entire document, they must appear after the appendices and before the references.
• Include the heading “ENDNOTES” in all capital letters, and center it 1″ below the top of the first page of your endnotes section(s).
• Single-space endnotes that are more than one line long.
• Number all endnotes with Arabic numerals. You may number notes consecutively within each chapter starting over with number 1 for the first note in each chapter, or you may number notes consecutively throughout the entire document.
• Endnote numbers must precede the note and be placed slightly above the line (superscripted). Leave no space between the number and the note.

Tables, figures, and illustrations vary widely by discipline. Therefore, formatting of these components is largely at the discretion of the author.

For example, headings and captions may appear above or below each of these components.

These components may each be placed within the main text of the document or grouped together in a separate section.

Space permitting, headings and captions for the associated table, figure, or illustration must be on the same page.

The use of color is permitted as long as it is consistently applied as part of the finished component (e.g., a color-coded pie chart) and not extraneous or unprofessional (e.g., highlighting intended solely to draw a reader's attention to a key phrase). The use of color should be reserved primarily for tables, figures, illustrations, and active website or document links throughout your thesis or dissertation.

The format you choose for these components must be consistent throughout the thesis or dissertation.

Ensure each component complies with margin and pagination requirements.

Refer to the List of Tables, Figures, and Illustrations section for additional information.

If your thesis or dissertation has appendices, they must be prepared following these guidelines:

• Appendices must appear at the end of the document (before references) and not the chapter to which they pertain.
• When there is more than one appendix, assign each appendix a number or a letter heading (e.g., “APPENDIX 1” or “APPENDIX A”) and a descriptive title. You may number consecutively throughout the entire work (e.g., 1, 2 or A, B), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number or letter to indicate its consecutive placement (e.g., “APPENDIX 3.2” is the second appendix referred to in Chapter Three).
• Include the chosen headings in all capital letters, and center them 1″ below the top of the page.
• All appendix headings and titles must be included in the table of contents.
• Page numbering must continue throughout your appendix or appendices. Ensure each appendix complies with margin and pagination requirements.

You are required to list all the references you consulted. For specific details on formatting your references, consult and follow a style manual or professional journal that is used for formatting publications and citations in your discipline.

Your reference pages must be prepared following these guidelines:

• If you place references after each chapter, the references for the last chapter must be placed immediately following the chapter and before the appendices.
• If you place all references at the end of the thesis or dissertation, they must appear after the appendices as the final component in the document.
• Select an appropriate heading for this section based on the style manual you are using (e.g., “REFERENCES”, “BIBLIOGRAPHY”, or “WORKS CITED”).
• Include the chosen heading in all capital letters, and center it 1″ below the top of the page.
• References must be single-spaced within each entry.
• Include one double-spaced line between each reference.
• Page numbering must continue throughout your references section. Ensure references comply with margin and pagination requirements.

In some cases, students gain approval from their academic program to include in their thesis or dissertation previously published (or submitted, in press, or under review) journal articles or similar materials that they have authored. For more information about including previously published works in your thesis or dissertation, see the section on Use of Your Own Previously Published Materials and the section on Copyrighting.

If your academic program has approved inclusion of such materials, please note that these materials must match the formatting guidelines set forth in this Guide regardless of how the material was formatted for publication.

Some specific formatting guidelines to consider include:

• Fonts, margins, chapter headings, citations, and references must all match the formatting and placement used within the rest of the thesis or dissertation.
• If appropriate, published articles can be included as separate individual chapters within the thesis or dissertation.
• A separate abstract to each chapter should not be included.
• The citation for previously published work must be included as the first footnote (or endnote) on the first page of the chapter.
• Do not include typesetting notations often used when submitting manuscripts to a publisher (i.e., insert table x here).
• The date on the title page should be the year in which your committee approves the thesis or dissertation, regardless of the date of completion or publication of individual chapters.
• If you would like to include additional details about the previously published work, this information can be included in the preface for the thesis or dissertation.

Previous: Order and Components

Next: Distribution

Thesis & Dissertation: Guidelines for Masters and PhD Programs

General guidelines for formatting dissertation or thesis.

In formatting your dissertation or thesis, you must follow the guidelines for page composition presented on the following requirements. General guidelines are shown first; specific guidelines relative to each section of your dissertation or thesis follow.

Pagination for Body of Dissertation or Thesis

• Use continuous Arabic numbers (beginning with 1) inthe same size font as the text for the body of the dissertation or thesis.
• Page numbers are placed at the bottom of the page,centered between the margins. There should always be at least a 24-point space between the page number and the text.
• Chapters within the text begin on new pages.
• There are no format requirements for chapter headings. You should use a format that is standard in your field and be consistent for all chapters.
•  There should be no page breaks between sections or before tables or figures, unless they occur naturally. (Exception: If the bibliography is placed at the end of each chapter, a page break needs to be placed at the end of the text and the bibliography started on the next page. The page number stays at the bottom of the page.)
• In a dissertation or thesis with two volumes, the second must continue the numbering of the first part. Each volume must contain a title page (labelled beneath the title with the words “Volume I” or “Volume II”), and the title page of the second volume is counted as a text page but the numeral is not printed on the page.

Pagination for Preliminary Pages

• Preliminary pages are numbered consecutively, usinglowercase Roman numerals in the same size font as the text, centered between the margins, at least 0.5 inch from the bottom of the page.
• Page numbering starts with the biographical sketch,which is numbered as “iii.” (The title page and copyright page are counted but not numbered; the abstract is neither counted nor numbered.) Every preliminary page thereafter is numbered, including multiple pages within a section.

Exact margins are absolutely essential so that the dissertation or thesis can be microfilmed in its entirety for interlibrary loan. After photocopying, margins must be at least:

• Left margin: 1.5 inches or slightly larger.
• Top, bottom, right margins: 1 inch or slightly larger.

(Hint: It is recommended that you set margins at 1.6 inches for the left margin and 1.1 inches for all other margins, since photocopying may enlarge the text by as much as 2 percent.) These margins apply to all pages, including those with tables and figures.

Justification

• Left-aligned, ragged right margins are preferred.
• If you are using a computer or word processor, usejustified margins only if the computer does this well, i.e., does not separate punctuation from characters or leave large gaps in the text.

The dissertation or thesis must contain correct vertical spacing (or 24-point spacing), which is defined as three lines of type and three line spaces per vertical inch throughout the text. Microsoft Word users: go to Format/Paragraph/Indents and Spacing/Line spacing and choose “Exactly.” Set the points at 24. (To check that the font is three lines per inch, place a ruler vertically on the page and measure from the top of the first line to the top of the fourth line.) Exceptions:

• Quotations and footnotes may be single-spaced within each entry.
• Lengthy tables may be single-spaced.
• In an M.F.A. thesis, irregular spacing is permitted to accommodate poetry, some of which is written single-spaced, some triple-spaced, and some with variable spacing.

The Body of the Dissertation or Thesis

• Appendix (or Appendices) (optional)

Bibliography (or References or Works Cited)

• If using a PC, the following fonts and font sizes are acceptable:
• Times New Roman 12
• Helvetica 12
• Times 14 (Times 12 is not acceptable)
• Other fonts may be acceptable (but Courier is not).Check the font with the Thesis Advisor.
• Footnotes may be single-spaced in a 10-point size but must be in the same font as the rest of the text.

Equations, Formulas, and Sub- and Superscripts

• All equations and formulas should be typeset.
• When a computer, word processor, or typewriter cannot make the symbol, insertions by hand are acceptable.
• Equations also may be inserted from a non-matching typewriter or laser-printer font.
• All subscripts and superscripts must be large enough to be read on microfilm. (To ensure readability on microfilm, test a page with sub- or superscripts by photocopying the page using a 25 percent text reduction. If the sub- or superscripts are still readable, then they are large enough.)

Corrections

Strikeovers, correction fluid, and correction tape are not acceptable in the filed copies.

Widows and Headings Separated from Text

•  A dissertation or thesis will not be accepted if it contains “widows” (short lines ending a paragraph at the top of a page) at the end of a chapter.
•  A dissertation or thesis will not be accepted if it contains a heading or subhead at the bottom of a page that is separate from its respective text on the following page.
• In addition to the general formatting guidelines shown above, the following specific guidelines must be followed for each individual section of your dissertation or thesis.

Required Sections, Guidelines, and Suggestions

Required yes.

Typeset the title in all capital letters, centered within the left and right margins, correctly spaced, about 1.5 inches from the top of the page. • Carefully select words for the title of the dissertation or thesis to represent the subject content as accurately as possible. Words in the title are important access points to researchers who may use keyword searches to identify works in various subject areas. • Use word substitutes for formulas, symbols, superscripts, Greek letters, etc. Below the title, at the vertical and horizontal center of the margins, correctly spaced, position the following five lines (all centered): Line 1: A Dissertation [or Thesis] Line 2: Presented to the Faculty of the Weill Cornell Graduate School Line 3: of Medical Sciences Line 4: in Partial Fulfillment of the Requirements for the Degree of Line 5: Doctor of Philosophy [or other appropriate degree] • Center the following three lines within the margins, 1.5 inches from the bottom of the page: Line 1: by Line 2: [name under which you are registered in the University Registrar’s Office] Line 3: [month and year of degree conferral, not the date the dissertation or thesis is submitted; no comma between month and year]

Copyright page

A notice of copyright should appear as the sole item on the page (there is no page heading), centered vertically and horizontally within the margins: © 201_ [student’s registered name] • The copyright symbol is a lower case “c,” which must be circled. (On Macintosh computers, the symbol is typed by pressing the “option” and “g” keys simultaneously. If the font does not have the © symbol, type the “c” and circle it by hand. On PCs, go to the insert menu, choose “symbol,” and highlight the © symbol.)

Required ? Yes

Doctoral candidates.

The heading of the abstract in a dissertation is centered between the left and right margins about 1.1 inches down from the top of the page; it includes the following lines: TITLE OF DISSERTATION Student’s Name, Ph.D. Cornell University 201_ [year of conferral]

• Following the heading lines, skip one 24-point-spaced line and begin the text of the abstract on the same page.
• The abstract should state the problem, describe the methods and procedures used, and give the main results or conclusions of the research.
• The abstract must not exceed 350 words in length (generally about one-and-one-half correctly spaced pages; the abstract may not be more than two pages).

Master’s candidates

• The page heading of the abstract in a thesis is simply the word “ABSTRACT” in all capital letters, centered within the margins at the top of the page. (The thesis abstract does not display the thesis title, author’s name, degree, university, or date of degree conferral.)
•  The abstract must not exceed 600 words in length (approximately two-and-one-half to three pages of correctly spaced typing).

Biographical Sketch

The biographical sketch must be written in third-person voice and contain your educational background. It may contain additional biographical facts.

• As a page heading, use “BIOGRAPHICAL SKETCH” in all capital letters, centered on the page.
•  Number this page as iii. (This is the first numbered preliminary page.)

Dedication 

Required optional.

No title is used on the page.

• The text is centered on the page and can be shown in italic or regular type.
• Text on this page does not need to be in English

Acknowledgments

• The acknowledgments may be written in first-person voice. If your research has been funded by outside grants, you should check with the principal investigator of the grant regarding proper acknowledgment of the funding source. Most outside funding sources require some statement of acknowledgment of the support; some also require a disclaimer from responsibility for the results.
• As a page heading, use “ACKNOWLEDGMENTS” in all capital letters, centered on the page.

Table of Contents

As a page heading, use “TABLE OF CONTENTS” in all capital letters, centered on the page.

• List the sections/chapters of the body of the dissertation or thesis; also list preliminary sections starting with the biographical sketch. (The title page, copyright page, and abstract are not listed.)
• If the dissertation or thesis consists of two volumes, list “Volume II” as a section in the table of contents.
• Page numbers must be listed in a column to the right of each section or chapter title; only the first page of each chapter or section is stated (not a range of page numbers, such as 7–22).
• The table of contents may be single-spaced.

List of Figures and List of Illustrations

Required if included.

As a page heading, use “LIST OF FIGURES” or "LIST OF ILLUSTRACTIONS" in all capital letters, centered on the page.

• The list must contain enough of the titles or descriptions so that readers can locate particular items using the list. (It may not be necessary to include entire figure/illustration captions.)
• The list must contain the page number on which each figure or illustration is found, as in a table of contents.
• The list of figures/ illustrations may be single-spaced.
• Figures/ illustrations must be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or they may be placed directly into the text. If a figure is placed directly into the text, text may appear above or below the figure/illustration/table; no text may wrap around the figure/illustration/table.
• If a figure/illustration appears on a page without other text, it must be centered vertically within the margins on the page.
• Figures/ Illustrations may not be placed at the end of the chapter or at the end of the dissertation or thesis.
• Figure/illustration must be either continuous throughout the dissertation or thesis, or by chapter (e.g., 1.1, 1.2; 2.1, 2.2, etc.). The word “Figure,”  "Illustration" must be spelled out (not abbreviated), and the first letter must be capitalized.
• A caption for a figure/illustration must be placed at the bottom of the figure.
•  If the figure/illustration not including the caption, takes up the entire page, the figure/illustration caption must be placed alone on the preceding page and centered vertically and horizontally within the margins. (When the caption is on a separate page, the List of Figures, List of Illustrations  will list the page number containing the caption.)
• If the figure/illustration not including the caption, takes up more than two pages it must be preceded by a page consisting of the caption only. The first page of the figure/illustration must include the figure/illustration (no caption), and the second and subsequent pages of the figure/illustration/table must also include, at the top of the figure/illustration/table, words that indicate its continuance—for example, “Figure 5 (Continued)”—and on these pages the caption is omitted.
• If figures/illustrations are too large, they may be slightly reduced so as to render a satisfactory product or they must either be split into several pages or be redone. If a figure/illustration is reduced, all lettering must be clear, readable, and large enough to be legible. All lettering, including subscripts, must still be readable when reduced 25 percent beyond the final version. All page margin requirements must be maintained. Page numbers and headings must not be reduced. Figure/illustration captions must be in the same font and font size as the text, not reduced.
• The caption of a figure may be single-spaced, but then captions for all figures/illustrations/tables must be single-spaced.
• Horizontal figures/ illustrations must be positioned correctly—i.e., the top of the figure/illustration will be at the left margin of the vertical page of the dissertation or thesis (remember: pages are bound on the left margin). Figure/illustration headings/captions are placed with the same orientation as the figure/illustration when they are on the same page as the figure/illustration. When they are on a separate page, headings/captions are always placed in vertical orientation, regardless of the orientation of the figure/ illustration.
• Page numbers are always placed as if the figure/illustration was vertical on the page.

List of Tables

• As a page heading, use ““LIST OF TABLES” in all capital letters, centered on the page.
• There must be separate pages for “LIST OF TABLES” even if there is only one example of each.
• The list must contain enough of the titles or descriptions so that readers can locate particular items using the list. (It may not be necessary to include entire table captions.)
• The list must contain the page number on which each  table is found, as in a table of contents.
• The list of tables may be single-spaced.
• Tables must be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or they may be placed directly into the text. If a table is placed directly into the text, text may appear above or below the figure/illustration/table; no text may wrap around the figure/illustration/table.
• If a table appears on a page without other text, it must be centered vertically within the margins on the page.
• Tables may not be placed at the end of the chapter or at the end of the dissertation or thesis.
• Table numbering must be either continuous throughout the dissertation or thesis, or by chapter (e.g., 1.1, 1.2; 2.1, 2.2, etc.). The word “Table” must be spelled out (not abbreviated), and the first letter must be capitalized.
•  A caption for a table must be placed above the table.
• If the table, not including the caption, takes up the entire page, the table caption must be placed alone on the preceding page and centered vertically and horizontally within the margins. (When the caption is on a separate page, the List of Tables will list the page number containing the caption.)
• If the table, not including the caption, takes up more than two pages it must be preceded by a page consisting of the caption only. The first page of the table must include the table (no caption), and the second and subsequent pages of the table must also include, at the top of the table, words that indicate its continuance—for example, “Figure 5 (Continued)”—and on these pages the caption is omitted.
• If tables are too large, they may be slightly reduced so as to render a satisfactory product or they must either be split into several pages or be redone. If a table is reduced, all lettering must be clear, readable, and large enough to be legible. All lettering, including subscripts, must still be readable when reduced 25 percent beyond the final version. All page margin requirements must be maintained. Page numbers and headings must not be reduced.
• Table captions must be in the same font and font size as the text, not reduced.
• The caption of a figure/illustration/table may be single-spaced, but then captions for all figures/illustrations/tables must be single-spaced.
•  Horizontal tables must be positioned correctly—i.e., the top of the table will be at the left margin of the vertical page of the dissertation or thesis (remember: pages are bound on the left margin). Table headings/captions are placed with the same orientation as the table when they are on the same page as the table. When they are on a separate page, headings/captions are always placed in vertical orientation, regardless of the orientation of the table.

List of Abbreviations

•  As a page heading, use “LIST OF ABBREVIATIONS” in all capital letters, centered on the page.

List of Symbols

•  As a page heading, use “LIST OF SYMBOLS” in all capital letters, centered on the page.
• As a page heading, use “PREFACE” in all capital letters, centered on the page.

Body of the Dissertation or Thesis: Text, Appendix, Bibliography

•  Chapter headings may be included that conform to the standard of your academic field.
• Textual notes that provide supplementary information, opinions, explanations, or suggestions that are not part of the text must appear at the bottom of the page as footnotes. Lengthy footnotes may be continued on the next page. Placement of footnotes at the bottom of the page ensures that they will appear as close as possible in the microfilm to the referenced passage.
•  Footnotes may be single-spaced in a 10-point size but must be in the same font as the text.
• Footnotes should be numbered with superscripted Arabic numerals. Numbering can be continuous throughout the dissertation or thesis or may start again for each chapter or page, but the method used must be consistent throughout the document. (Once footnotes have been numbered, any footnotes that are inserted later will require the renumbering of all footnotes to accommodate the newly inserted one. Amending the existing footnote numbers by adding letters to distinguish repeated Arabic numerals—for example, 12a, 12b—is not allowed.)

Published Material.

• If the material in any chapter has already been published or accepted for publication, written permission from the publisher authorizing the student to use it in the dissertation must be submitted.
• On the first page of all published chapters, type an asterisk (*) next to the title(s). The asterisk should appear again at the bottom of the page, followed by a complete reference to the publication.

Appendix (or Appendices)

•  As a page heading, use “APPENDIX” in all capital letters, centered on the page.
•  Place in an appendix any material that is peripheral but relevant to the main text of the dissertation or thesis, such as survey instruments, additional data, computer printouts, details of a procedure or analysis, a relevant paper that you wrote, etc.
•  The appendix may include text that does not meet the general font and spacing requirements of the other sections of the dissertation or thesis.
• As a page heading, use “BIBLIOGRAPHY” (or “REFERENCES” or “WORKS CITED”) in all capital letters, centered on the page.
•  Bibliographies may be single-spaced within each entry but must be 24-point-spaced between entries.
• The Graduate School recommends that you follow the standard citation format used by a major journal in your academic field and that the style be consistent throughout the dissertation or thesis. (Also see “References for Style and Format.”)

For more information please read the Graduate Degree Requirements: Instructions for Doctoral Dissertation and Thesis Preparation:

Fair Use, Copyright, Patent, and Publishing Options

1. Is information that you plan to include from others considered “fair use” and are you acknowledging these sources correctly?

You are responsible for acknowledging any facts, ideas, or materials of others that you include in your work. You must follow the guidelines for acknowledging the work of others in the “Code of Academic Integrity and Acknowledging the Work of Others” (published in the Policy Notebook for the Cornell Community).

If you use any copyrighted material in the dissertation or thesis, it is your responsibility to give full credit to the author and publisher of work quoted. The acknowledgment should be placed in a footnote at the bottom of the first page of the paper or chapter. Additionally, you must determine whether use of the material can be classified as a “fair use” by performing an analysis of your use of each copyrighted item. Please access the Copyright sources at Weill Cornell Library here. These resources are helpful tools for performing this analysis. (See also, Copyright Law and the Doctoral Dissertation: Guidelines to Your Legal Rights and Responsibilities , published by ProQuest, or The Chicago Manual of Style, published by the University of Chicago Press.)

If your use of material is not considered a “fair use,” you must obtain written permission from the copyright owner. Two copies of each permission letter must be submitted with the dissertation or thesis. ProQuest has specific requirements for the content of the permission letter. For these guidelines, consult the ProQuest Doctoral Dissertation Agreement form (published by ProQuest).

If you have already published or had accepted for publication part of your own dissertation or thesis material in a journal, depending on the terms of your publication agreement, it may be necessary to write to that journal and obtain written authorization to use the material in your dissertation.

2. Embargo of online copies

The value of your dissertation extends well beyond your graduation requirements. It’s important that you make an informed decision about providing online access, via ProQuest and eCommons, to your work. This decision can expand the visibility and impact of your work, but it can also shape the options available to you for publishing subsequent works based on your dissertation.

ProQuest’s ProQuest Dissertations and Theses (PQDT) database indexes almost all dissertations published in the U.S. and provides subscription access online to the full text of more recent dissertations. ProQuest also sells print copies of dissertations, paying royalties to authors, when they exceed a minimum threshold. Authors retain copyright in the works they submit to ProQuest.

eCommons is a service of the Cornell University Library that provides long-term, online access to Cornell-related content of enduring value. Electronic theses and dissertations deposited in eCommons, unless subject to embargo, are freely accessible to anyone with an internet connection. When submitting to eCommons, you retain copyright in your work. Ph.D. dissertations and master’s theses submitted to ProQuest are automatically submitted to eCommons, subject to the same embargo you select for ProQuest.

Electronic copies of dissertations in PQDT or eCommons may be made accessible immediately upon submission or after an embargo period of six months, one year, or two years. You may wish to consider an embargo period which helps address publishers’ interests in being the first to publish scholarly books or articles, while also ensuring that scholarship is accessible to the general public within a reasonable period of time. Your decision should be made in consultation with your special committee.

3. Creative Commons license

Creative Commons licenses provide authors with a straightforward and standardized means of prospectively granting certain permissions to potential users of the author’s material. Authors may request proper attribution, permit copying and the creation of derivative works, request that others share derivative works under the same terms and allow or disallow commercial uses. Authors may even choose to place their works directly into the public domain. You will have the option of selecting a Creative Commons license when you upload your dissertation or thesis to ProQuest, and your choice will automatically be applied to the copy of your work in eCommons.

4. Has a patent application been filed (or will one be) on the basis of your thesis or dissertation research?

Cornell University Policy 1.5 governs inventions and related property rights and MSK’s Policy on Intellectual Property . Inventions made by faculty, staff, and students must be disclosed to the Center for Technology Licensing at Cornell University (CTL). Theses and dissertations describing patentable research should be withheld from publication, in order to avoid premature public disclosure. Use the delayed release (embargo) option if a patent application is or will be in process, noting the reason for the delay as “patent pending.” If you have any questions, please contact Cornell’s Center for Technology Licensing at 607-254-4698 or [email protected] .

5. Register for copyright?

Copyright law involves many complex issues that are relevant to you as a graduate student, both in protecting your own work and in referencing the work of others. Discussion of copyright in this publication is not meant to substitute for the legal advice of qualified attorneys. A more detailed discussion of copyright law can be found in the publication from ProQuest entitled Copyright Law and the Doctoral Dissertation: Guidelines to Your Legal Rights and Responsibilities by Kenneth D. Crews.

Copyright protection automatically exists from the time the work is created in fixed form and the copyright immediately becomes the property of the author. Registration with the United States Copyright Office is not required to secure copyright; rather it is a legal formality to place on public record the basic facts of a particular copyright. Although not a condition of copyright protection itself, registering the copyright is ordinarily necessary before any infringement suits can be filed in court.

To register a copyright for your dissertation or thesis, register online or download printable forms . You may also request forms by mail from the Information Section, U.S. Copyright Office, Library of Congress, Washington, D.C. 20559, or contact them by telephone at 202-707-3000.

Doctoral candidates: You may authorize ProQuest to file, on your behalf, an application for copyright registration. This option will be presented to you as part of the submission process.

6. Supplementary materials

If supplementary materials (audio, video, datasets, etc., up to 2GB per file) are part of your thesis or dissertation, you may submit them as supplementary files during the online submission process. For help selecting long-lived file formats, note ProQuest’s guidance in their document, “Preparing Your Manuscript for Submission (Including Supplemental Files).” File formats for which ProQuest does not guarantee migration may still have a high likelihood of preservation in Cornell’s digital repository; please see the eCommons help page for further guidance.

Do not embed media files in the PDF version of your thesis or dissertation, as this can significantly increase the size of the file and make it difficult to download and access. Include a description of each supplementary file in the abstract of your thesis or dissertation. You may include an additional supplementary file containing more detailed information about the supplementary materials as a “readme” file or other form of documentation; this is particularly advisable for data sets or code. The Research Data Management Service Group ( [email protected] ) offers assistance in preparing and documenting data sets for online distribution.

7. Make your work discoverable on search engines?

ProQuest offers authors the option of making their graduate work discoverable through major search engines including Yahoo, Google, Google Scholar, and Google Books. If you chose the Search Engine option on their dissertation “paper” publishing agreement or within ProQuest’s PROQUEST ETD Administrator (electronic submission service), you can expect to have your work appear in the major search engines.

If you change your mind and do not want your work to be made available through search engines, you can contact customer service at [email protected] or 800-521-0600 ext. 77020. In addition, if you did not initially adopt this option but now want your works made available through this service, contact the customer service group to change your selection. Please note that search engines index content in eCommons, regardless of the choice you make for ProQuest.

Weill Cornell Medicine Graduate School of Medical Sciences 1300 York Ave. Box 65 New York, NY 10065 Phone: (212) 746-6565 Fax: (212) 746-8906

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page
• Table of Contents
• List of Figures (etc.)
• Acknowledgments
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

Every page in your manuscript (except the Title and Copyright pages) must be numbered.

All page numbers should be centered at the bottom of each manuscript page.

See specific Pagination guidelines for the Preliminary Pages and the Text and Reference (Body) Pages .

Page size and margins

The final version of your thesis/dissertation must be on an  8.5" x 11" (letter size)  page.

All manuscript text, excluding manuscript page numbers, must fit within these specified margin requirements:

Minimum 1-inch margins  from the top, left, right, and bottom edges of each page

Tables, figures, graphs, photographs, and appendices are also included in these margin requirements. Materials may be reduced or enlarged, if necessary, to fit within the required margins. Pages may be rotated to landscape orientation to accommodate tables or illustrations .

Your manuscript must be  double-spaced,  with the exception of footnotes/endnotes, bibliographic entries, long quotations, data in lists and tables, lists in appendices and figure/table captions, all of which should be single-spaced.

• << Previous: Fonts/Typeface
• Next: Paper Thesis Formatting >>
• Last Updated: Aug 26, 2024 11:00 AM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

Graduate School

• Resources to Prepare for Graduate School
• Adonara Mucek, Ph.D. Geology '17
• Adriana Mendoza, Ph.D. Mathematics '14
• Andrew Olsen
• Becca Maher ('21, Ph.D.)
• Bryan Lynn, Ph.D. Integrative Biology
• Celeste Frazier Barthel, Ph.D. Education '21
• Diane Brandt
• Francesca Germano, Toxicology, M.S.
• Garrett Rogers
• Jafra Thomas
• Jen Hayes, Horticulture, PhD
• Jordan Jimmie
• Jordan Spradlin, Public Health, MPH
• Kalina Fahey, Psychology, Ph.D.
• Katie Stelling, Earth, Ocean and Atmospheric Sciences, Ph.D.
• Kelsey Contreras
• Layla Ghazi
• Marie Tosa, Ph.D. Wildlife Sciences
• Sara Letton
• Tiara Walz, Ph.D. Public Health
• Glossary of Terms
• Master's Students
• Doctoral Students
• Certificate Students
• Graduate School Orientation 2024
• Graduate Teaching Orientation 2024
• Do I Qualify to Attend Graduate Summer Step?
• Orientation for Winter, Spring and Summer Terms
• Co-sponsorships
• Your Graduate Committee
• Student Resources
• Grad Research Photo Competition
• Tips for Scheduling Committee Meetings
• Program of Study

Formatting a Thesis or Dissertation

• Pretext Pages Templates
• Commencement
• Grad Inspire
• Grievance Procedures
• Request a Workshop
• Earning Concurrent Degrees or Pursuing a Dual Major
• Career Preparation
• Grad Writing Group Challenge
• Graduate Writing Center Online
• Changing or Adding a Degree, Major or Certificate
• GRAD 420 - Graduate School Preparation
• GRAD 512 - Current Issues in Higher Education
• GRAD 513 - Professional Development in College and University Teaching
• GRAD 516 - Graduate Teaching Seminar
• GRAD 520 - Responsible Conduct of Research
• GRAD 521 - Research Data Management
• GRAD 542 - The Inclusive College Classroom
• GRAD 543 - Dialogue Facilitation in Professional Contexts: Skills and Practice for Graduate Students
• GRAD 550 - Introduction to Online Course Development and Facilitation
• GRAD 560 - Theories of Teaching and Learning
• GRAD 561 - Course Design and Methods
• GRAD 599 - Creating Happiness
• GRAD 599 - Cultivating Productive and Positive Academic Relationships for Graduate Success
• WR 599 - Graduate Writing for English Language Learners
• WR 599 - Scientific and Technical Research Writing
• WR 599 - Writing Workshop for Thesis and Dissertation Writers
• OSU Grad Advantage
• Graduate Faculty Membership
• Graduate Council Representatives
• Policy updates
• Holistic Admissions
• Defining the Graduate Mentor
• The Importance of Mentors
• Apprenticeship and Mentoring
• Mentor and Mentee Pairing
• Maintaining and Evaluating Mentoring
• Suggestions for Mentoring Programs
• Handbooks, Manuals, and Guides
• Mentoring Bibliography
• Communication Items
• Detailed Considerations for a Joint Degree Program
• MOU Outline for Creating a Joint Program
• College and Program Recruitment Representatives
• Graduate Recruitment Tips
• Helpful Recruitment Links
• Shared Graduate Recruitment Schedule
• Leave of Absence and Family Medical Leave Eligibility
• Mentor Training for Faculty
• Student Funding
• Student Progress
• Student Progress Information for Programs
• Student Registration Information
• August 2023 Newsletter
• Sept 2023 Newsletter
• October 2023 Newsletter
• November 2023 Newsletter
• April 2024 Newsletter
• Dec 2023 Newsletter
• Feb 2024 Newsletter
• Jan 2024 Newsletter
• June 2024 Newsletter
• March 2024 Newsletter
• May 2024 Newsletter
• Strategic Plan
• Request Info
• Current Students
• Faculty Resources

You are here

On this page:

Congratulations! You have arrived at an important step in the pursuit of your graduate degree—the writing of your thesis or dissertation. Your scholarly publication reflects the results of your research and academic pursuits at Oregon State University.

Student Responsibility

Students are responsible for:

• Meeting the deadlines associated with its preparation. Visit the master's deadlines and the doctoral deadlines.
• Submitting the necessary forms.
• Ensuring that your document conforms to all requirements in this Thesis Guide.

Your document must clearly state your objectives and conclusions, and present your results in a lucid and succinct manner. It must have a professional appearance and be user-friendly.

Ethical research practice requires you to avoid the following:

• Plagiarism: failure to acknowledge the work of others by using proper citations and obtaining written permission to use copyrighted material.
• Fabrication: the creation of fictitious research results.
• Falsification: alteration of research results by misrepresentation or selective reporting of findings.

General Format

Standard Document Format refers to one thesis document that addresses a single theme. The Pretext Pages, Introduction, Conclusion, and Bibliography are mandatory. Your committee determines the additional chapters; you choose the chapter titles. The following parts comprise the Standard Document Format:

• Pretext Pages (see model pages illustrated in Figures 2-11)
• Chapter 1 – Introduction
• Chapter 2 – Literature Review
• Chapter 3 – Materials and Methods
• Chapter 4 – Results
• Chapter 5 – Discussion
• Chapter 6 – Conclusion

Bibliography

• Appendices (optional)

Manuscript Document Format is a single thesis document made up of several scholarly manuscripts or journal articles addressing a common theme. All manuscripts/articles must be related or address a single, common theme. You must be the primary author of each manuscript. Co-authors other than your major professor must be mentioned in a Contribution of Authors page (see Figure 9) in the pretext section of the document. Formatting should be consistent for each journal article and must follow the thesis guide formatting not the separate journal formats. The following parts comprise the Manuscript Document Format:

• Chapter 1 – General Introduction (common introduction linking all manuscripts thematically)
• Chapter 2 – First Manuscript
• Chapter 3 – Second Manuscript
• Chapter 4 – General Conclusion (common conclusion linking all manuscripts thematically)
• Bibliography (common bibliography covering all manuscripts, although each manuscript may have its own reference section)
• Appendices – (optional)

Note: Within the larger Manuscript Format thesis document, Chapter Heading Pages (see Figure 1 below) precede individual manuscripts that have already been published. If not published, page is not required. Manuscripts must uniformly conform to these thesis guidelines.

MANUSCRIPT TITLE CENTERED AND ALL CAPS

Your name and other authors

Journal name Address of journal Issue manuscript appears in

Figure 1. Chapter Heading Page for Manuscript Document Format

Page Layout

Margin requirements.

The left margin must be 1 inch unless printing and binding a personal or departmental copy then change to 1.5 inch. All other margins must be at least 1 inch, preferably 1.2 for top margin. Nothing may invade a margin. Every page must meet margin requirements. Margin requirements are especially important if binding a copy of your thesis.

Page Numbering

Pretext pages: Do not add page numbers to pretext pages.

Body: The body of the text begins with page 1 and all successive pages are numbered consecutively with Arabic Numbers (e.g. 2, 3, etc.) including Appendix/Appendices and Bibliography. Page numbers should be the same size and font as the body of the text. Page numbers must appear at the top right corner of pages, approximately 1 inch from the top edge of the page and at least 1 inch from the right edge of the page. Page numbers must not invade any margins. There should be at least one space between the page number and the first line of text.

Your title must be worded exactly the same throughout the document as it appears on the Abstract page, Title page and centered on page one (optional). Titles longer than one line should be single-spaced. The document's title does not count as a heading level.

Text Requirements

Text spacing.

Line spacing must be 1.5 or double, consistent throughout the document and matching which one you choose for the body of the thesis. Use single spacing only in the following situations:

• Headings longer than one line
• Figure and table titles and associated legends
• Bibliographical and reference citations
• Direct quoted material
• Items listed within the body of the text (optional)
• Where indicated in the pretext section

Use regular, unadorned print, 10- to 12-point size for text (headings may be 14-point only if all headings are 14-point). Font size within figures and tables can be smaller but must be readable. Use the same font style and font size throughout.

Chapter names are Level 1 headings. Subheadings of a chapter are Level 2 headings. Subheadings of chapter subheadings are Level 3 headings, and so forth. Each level must look different from the other levels. Headings of the same level must look the same throughout the document. All headings, regardless of level, must be the same font size. Either number all headings or number none (See figures 10a and 10b). Single space headings that are more than one line. Use adequate and consistent spacing between the headings and the text. A minimum of two subheadings may be used within a given level. Each level 1 heading begins a new page.

Appendix Heading Page

A numbered, counted page should be inserted in front of your document's appendix/appendices. The word APPENDIX (or APPENDICES) should be centered about 1/3 down this page. This heading page and its page number should appear in the Table of Contents.

Blocked Quotes

Use Blocked Quotes for quoted material longer than three lines. Use the same font size as within the text. Single-space the quotation, and indent it evenly on both sides. Left justify the quotations.

Use the same font size as within the text. Choose a reference style with the guidance of your major professor and your committee and be consistent. Single-space each citation and use adequate and consistent spacing between citations.

Footnotes collected at the end of a chapter are called endnotes. Use the same font size as within the text. Single-space each endnote, and use adequate and consistent spacing between endnotes.

Orphan Lines, Headers, Footnotes

No orphan lines may appear at the top or bottom of a page. No headers or footers may be used. Footnotes are acceptable.

Figures and Tables

Figures and tables may be located in one of two places in your document. You must choose one system and use it consistently throughout your work.

• Insert the figure within the text, as close as possible after the first reference is made to it.
• Place your figures at the end of the chapter in which it is first discussed or referenced.

Figure Definition

The definition of a figure is quite broad. “Figures” include charts, diagrams, drawings, examples, graphs, illustrations, maps, photographs, etc. In the majority of cases, if it's not a table, it is a figure. All figures must be listed in the pretext pages' List of Figures.

Table Definition

A table is broadly defined as a compact, systematic list of data (facts, figures, values, etc.), generally arranged in columns and/or rows. All tables must be listed in the pretext pages' List of Tables.

Figure and Table Labels and Captions

A figure's or table's label denote the type of figure or table and its number, and a figure's or table's caption is its title and description. Every figure or table must have a label and caption unless there is only one of its type in the document. Use consecutive label numbers by order of appearance within the text. Each figure or table must have a unique number, i.e., Table 1.1 for the first table in Chapter 1, Table 2.1 for the first table in Chapter 2, or start with 1 and number consecutively. As always, pick one method and use it consistently throughout your document. Label and caption font size is the same as body text size. Add one space between the figure or table and its label and caption, and between the figure or table and text. The label and caption should be placed outside its boundaries, commonly above a table and below a figure.

Oversized Figures and Tables

Illustrations that take up more than one page should have the label followed by “(Continued)” on the second page. If both a figure/table and its label and caption do not fit on one page, place only the label on the page with the figure or table, and place the label and caption on a separate page that precedes the figure or table (called a legend page). Single-space the label and caption and center it 1/3 of the way down the page. Include no other text on this page. List the page number of the legend page in the pretext list.

There are two ways of managing the inclusion of oversized figures if printing personal copies:

• Reduction: Photographically reduce the size of figures to meet margin requirements.Page numbers and figure captions must remain the same font size as the text.
• Accordion Fold: If you are printing a personal or departmental copy. The final folded page must be 11 inches in height and no more than 8 inches wide. Fold the page from right to left, making the final folded width 8 inches. Fold the page a second time from left to right so the page number appears in the same position as all other pages in the text.

Landscaping

Because of their shape, some figures/tables may need to be placed crosswise on a page. If so, the top of the figure/table should be at the left margin as viewed normally (i.e. portrait orientation), and the caption should be parallel to the right margin. Reformatting pages numbers to match location of portrait oriented page numbers is not required. Margin requirements apply.

Choose high-contrast colors to differentiate lines, bars, or segments or use symbols with or without the color.

Parts of the Document (in Order of Appearance)

Regardless of general format, the thesis includes particular parts in an established order as listed below. Model pages are provided for most pretext pages. In all cases, margin requirements apply (see above) and the same font style/size must be used in the body of the text and elsewhere. All titles of pretext pages should be formatted identically with respect to font size and style.

I. Pretext Pages

Download templates for pretext pages.

An abstract is a summary of the document's purpose, methods, major findings, and conclusions. Your name (designated “Student Name”) must appear exactly the same throughout the document. In all cases, use the official name of the major as found in the OSU Catalog on the Graduate School's website under Programs. Please add underlines where indicated in the examples. (See figs. 2, 3, and 4)

AN ABSTRACT OF THE THESIS OF

Thomas A. Edison for the degree of Master of Science in Physics presented on January 30, 2024 A .

Title: Upon Recording Telegraph Messages Automatically.

Abstract approved: _______________________________________

Major I. Professor B

Begin text here, using the same line spacing (either double space or 1.5), font style and font size as within the body of the text in your document.

• Use official major name, not area of concentration
• Your name must appear exactly the same throughout the document
• For defense date use month spelled out, date, and year: January 30, 2022
• Title must be the same throughout the document

Figure 2. Abstract Page for Master's Degree. A The line breaks in these four lines are single space with a space after the defense date. B Include major professor's middle initial unless there is none. Do not include their title. Co-major Professors may share the same signature line; put both names below the line.

Student Name for the degree of Master of Arts in Interdisciplinary Studies in First Concentration A . , Second Concentration , and Third Concentration presented on Defense Date B .

Title: Underlined Title Here

Major I. Professor C

• Use official major or minor name, not area of concentration

Figure 3. Abstract Page for Master's Degree. A The line breaks in these four lines are single space with a space after the defense date. B The line breaks in these six are single-spaced with a space between the defense date and title. C Include major professor's middle initial unless there is none. Do not include their title. Co-major Professors may share the same signature line; put both names below the line.

AN ABSTRACT OF THE DISSERTATION OF

Student Name for the degree of Doctor of Philosophy in Official Name of Major presented on Defense Date A .

Title: Underline Title here.

Figure 4. Abstract Page for Doctoral Degree. A The line breaks in these four lines are single-spaced with a space between the defense date and title. B Include major professor's middle initial unless there is none. Do not include his/her title. Co-major Professors share the same signature line; put both names below the line with several spaces between names.

Copyright Page

Copyright by Thomas A. Edison January 30, 2022 All Rights Reserved or Creative Commons License

Figure 5. Copyright Page. Please choose either All Rights Reserved or Creative Commons License but not both. The copyright page is required. Inclusion of this page does not obligate you to go through a formal copyright process. Name must appear exactly the same throughout the document. Second line is the final defense date. Wording should begin one third down from the top and is centered.

Upon Recording Telegraph Messages Automatically

Title must match Abstract and page one title exactly. Do not boldface the title.

by Thomas A. Edison

Add two spaces after the title.  

A THESIS submitted to Oregon State University

Doctoral students may use “A DISSERTATION” instead of “A THESIS” on Title Page, Abstract, and Approval Pages.

in partial fulfillment of the requirements for the degree of

Follow division of this sentence ( in partial fulfillment of... ) exactly.

Master of Science

Spacing should be the same after your name, “Oregon State University,” and your degree.

Presented January 30, 2023 Commencement June 2023 A

Defense date.

Figure 6. Title Page. A Commencement date is the June following the defense date, so if defense is after the commencement ceremony it would be for the following year. Only month & year, no date or it will be rejected.

Approval Page

On the Approval Page the Major Professor represents the major. The Approval Page considers your advisor as your major professor, regardless of his/ her official rank or tenure home. Official major names and department names can be found in the OSU Catalog. Some majors and departments have the same name while others differ. Your signature constitutes consent to have your document available for public reference in Valley Library, but the signatures on this page have been replaced with the ETD Submission Approval form.

Master of Science thesis of Thomas A. Edison presented on January 30, 2023.

_______________________________________ Major Professor representing Physics

_______________________________________ Head of the Department of Physics A

_______________________________________ Vice Provost and Dean of the Graduate School

I understand that my thesis will become part of the permanent collection of Oregon State University libraries. My signature below authorizes release of my thesis to any reader upon request.

_______________________________________ Thomas A. Edison, Author

Figure 7. Standard Approval Page. A If not part of a department, please list the head/chair/dean of the school or college.

Alternate wordings for signature lines:

Wording with two major professors:

Co-Major Professor, representing Name of Major

Head/Chair of the Name of Department, School or College

Vice Provost and Dean of the Graduate School

Wording with dual majors:

Co-Major Professor, representing Name of 1st Major

Co-Major Professor, representing Name of 2nd Major

Wording for MAIS:

Major Professor, representing Name of Major Area of Concentration

Director of the Interdisciplinary Studies Program

Acknowledgements

The acknowledgements page is optional but recommended. The exact content of the page is up to the student. Use same text spacing: 1.5 or double-space.

ACKNOWLEDGEMENTS

The author expresses sincere appreciation...

Figure 8. Acknowledgements Page.

Contributions

Manuscript document format only. If no contributions remove this page. Use same text spacing either 1.5 or double space.

CONTRIBUTIONS

Dr. So-and-so assisted with data collection. Such-and- such was involved with the design and writing of Chapter 2. Dr. Whoisit assisted in the interpretation of the data.

Figure 9. Contributions (manuscript format only).

Table of Contents

Ensure that the page numbers accurately reflect where the headings appear in the text. Listing the chapter headings in the Table of Contents is required; listing the subheadings is optional, and you may list some levels but not others. Levels are denoted by indention in the Table of Contents. Wording, spelling, and capitalization of headings in the Table of Contents must match the heading in the body of the text exactly. If headings are numbered in the Table of Contents, they must be numbered correspondingly in the text.

List appendix or appendices (if applicable) in the Table of Contents, if more than five then create a separate List of Appendices. In either case, list the Appendices Heading Page (see page 3) in the Table of Contents. When listing an individual appendix, include its title.

If the Table of Contents is more than one page, subsequent pages should have the heading “TABLE OF CONTENTS (Continued)” and additionally "PAGE" underlined above the page numbers.

Return twice between the TABLE OF CONTENTS heading and the first item in the table.

Do not underline, bold, or italicize in the Table of Contents (unless scientific species name)

TABLE OF CONTENTS

1 Chapter Title

1.1 Level 2 Heading

1.2 Level 2 Heading

1.2.1 Level 3 Heading

1.2.2 Level 3 Heading

1.2.3 Level 3 Heading

1.3 Level 2 Heading

2 Chapter Title

2.1 Level 2 Heading

2.2 Level 2 Heading

2.2.1 Level 3 Heading

2.2.2 Level 3 Heading

3 Chapter Title

3.1 Level 2 Heading

3.2 Level 2 Heading

Appendix A Title

Appendix B Title

Figure 10a. Table of Contents with Numbering.

Chapter Title

Level 2 Heading

Level 3 Heading

Figure 10b. Table of Contents without Numbering.

List of Figures

Lists are required if two or more figures appear within the text. (Reference figures 11a and 11b.)

List of Tables

Lists are required if two or more tables appear within the text. (Reference figures 11a and 11b.)

Choose one of the two methods of numbering in the model pages illustrated in Figures 11a and 11b and use it for both Lists of Figures and Lists of Tables. If a list is longer than one page, subsequent pages should be headed “LIST OF FIGURES (Continued)” or “LIST OF TABLES (Continued)" along with "Figure" or "Page" underlined above the figure names and page numbers. The first sentence of the figure or table caption must be listed, and the wording must match the text exactly. List only one page number per figure or table. When there is a legend page in front of a figure (see information on FIGURES below), list the legend page only. Figures in the appendices are listed on a separate List of Appendix Figures list.

Add two spaces between the LIST OF FIGURES/TABLES heading and the first listing.

LIST OF FIGURES

Name of the figure

First sentence of the legend matches the text exactly

List only one page number

Keep numbers and words in separate columns

Figure 11a. List of Figures/Tables with Consecutive Numbering.

LIST OF TABLES

Name of the table

Spacing requirements are the same as for the List of Figures

A List of Appendix Tables would look the same

All pretext headings should look the same

Figure 11b. List of Figures/Tables with Numbering by Chapter.

List of Appendices (optional)

If list of appendices is short, it may be attached to the Table of Contents. For more than 5 appendices, or list different heading levels are listed in the appendices, a separate List of Appendices is required. If two or more figures appear in the appendices, a List of Appendix Figures and/or a List of Appendix Tables are required.

List of Appendix Figures

For two or more figures in the appendices.

List of Appendix Tables

For two or more tables in the appendices.

Other Lists

If you are including other lists, such as lists of abbreviations, nomenclature, symbols, and so forth, each list must have its own page. The elements of these lists do not need numbering or page numbers.

Dedication (optional)

If desired, you may dedicate your document to the honor of someone. Dedications are usually short. Margin requirements apply. Use the same font/font size as text body. Arrangement of page is at your discretion.

Preface (optional)

You may include a preface.

II. Body of Text

Follow standard or manuscript document format.

III. Bibliography

Iv. appendix or appendices (optional), final requirements, printing specifications.

The Graduate School no longer requires you to submit a paper copy of your thesis/dissertation.

Formatting Template

A formatting template for thesis and dissertation pretext pages can be found on our website.

Electronic Submission

Submit one PDF copy of your thesis/dissertation, without signatures, electronically to ScholarsArchive. Ensure accessibility with Adobe Acrobat Pro. For uploading and accessibility instructions refer to the library's website.

Creative Commons License

DO NOT SELECT PUBLIC DOMAIN OR CCO. You may add a Creative Commons License to your item that allows copyrighted works to be shared and re- used. Either select License Type: Creative Commons or License Type: No Creative Commons License. DO NOT assign a Creative Commons license if you plan to place an embargo on your thesis or dissertation that allows only the OSU community access to your work.

Final Documents Submitted to the Graduate School

One signed Electronic Thesis and Dissertation (ETD) Submission Approval form by your Major Professor, Head/Chair/Director/Dean of your major, and yourself. The Graduate School Dean's signature will be added after the submissions of the form.

You can request an embargo in ScholarsArchive so your work will be accessible only to Oregon State University faculty, staff and students for up to two years.

Contact Info

Graduate School Heckart Lodge 2900 SW Jefferson Way Oregon State University Corvallis, OR 97331-1102

Phone: 541-737-4881 Fax: 541-737-3313

• Programs - Majors, minors and certificates
• Academic Progress
• Student Success
• Faculty Support
• Staff Directory
• Graduate Catalog

Formatting your Thesis and Dissertation:Tools,Tips and Troubleshooting

• I am a new Graduate Student at Florida Tech!
• Thesis and Dissertation Templates
• Learn About Zotero
• Formatting Landscape Pages
• Line Spacing
• Page Numbers
• Page Break and Section Breaks
• Table of Contents or Figures
• Figures Turning Black
• Margin issues with Tables
• Page numbers not appearing
• PDF to PDF/A
• Section Breaks
• Landscape Page Numbers
• Troubleshoot LaTeX formatting issues
• Copyright and Creative Commons Licenses Primer
• Do I need to embargo my thesis or dissertation?
• I'm ready to submit my electronic copy - now what do I do?
• What is the process for obtaining print copies of my thesis or dissertation?

Adjust Margins

On the  Page Layout  ribbon,  Page Setup  group, choose  Margins :

At  Margins , hold the cursor down on the arrow. When the Margins dialog box opens, move the cursor to the bottom to  Custom Margins  and click on it:

On the  Page Setup  dialog box, the margins should be 1.2 inches on the top, right and bottom and 1.7 inches on the left. Whole document ( Depending on department regulation ).

• << Previous: Troubleshoot Word formatting issues
• Next: Formatting Landscape Pages >>
• Last Updated: Aug 9, 2024 9:18 AM
• URL: https://libguides.lib.fit.edu/formattingyourthesisanddissertationtoolstipstroubleshooting

Ohio State nav bar

The Ohio State University

• BuckeyeLink
• Find People
• Search Ohio State

Dissertation Formatting Tips and Tricks

All instructions are written for Word 2007 for PC. The basic instructions are the same for most versions of Word but the actual key strokes maybe slightly different.

Setting Margins

• Put your cursor at the very beginning of your document
• Select the ‘Page Layout’ tab from the ribbon
• Select ‘Margins’ in the Page Setup box
• Select ‘Custom Margins’
• Set the margins

Inserting a Two Inch Top Margin for the First Page of Chapter/Major Section

• Before beginning a new chapter or equivalent (bibliography, abstract, vita, etc.) insert a hard page break by pressing the ‘Ctrl’ key and the ‘Enter’ key at the same time.
• To insert a two inch top margin if you are in single line spacing press the ‘Enter’ key six times. If you are in double line spacing press the ‘Enter’ key three times. This will move the cursor down an additional inch so the page will have a two inch top margin without affecting the rest of the pages in the section or document.

Page Numbers

Insert page numbers.

• Select ‘Insert’ tab from ribbon
• Select ‘Page Number’ from the Header & Footer box
• Select ‘Bottom of Page’
• Select ‘Plain Number 2’
• In the Position box move the bottom position to 1 inch (default is 0.5 inch)
• Close the Header & Footer

Cover Unwanted Page Numbers

• Go to the page with the unwanted page number
• Select the ‘Insert’ tab from the ribbon
• Select ‘Text Box’ from Text
• Select ‘Draw Text Box’ from the Text Box options
• Draw your box anywhere on the page except in the footer area
• Drag the box you drew to cover the page number
• Select ‘Shape Outline’ from the Shape Styles box
• Select ‘No Outline’

Beginning with Small Roman Numerals for Preliminary Pages

• Put your cursor at the end of the copyright page
• Select Page Layout’ from the ribbon
• Select ‘Breaks’ from the Page Setup box
• Select ‘Next Page’ from the Breaks list
• Insert page number as previously discussed
• Select ‘Format Page Number’
• Change ‘Number Format’ to small Roman numerals
• Change ‘Start at’ to  'ii' (small Roman II)

Note : Some versions of Word will insert page numbers on the title page and the copyright page even though the insert command is not until the abstract page. A simple method for addressing this is covered in ‘Cover Unwanted Page Numbers.’

Changing from Small Roman Numerals to standard Arabic Numbers

• Put your cursor at the end of the text on the last page of your preliminary pages
• Select ‘Page Layout’ from the ribbon
• Select ‘Breaks’ from the Page Setup Box
• Insert page number (see Insert Page Number)
• Change ‘Number Format’ to standard numerals (1, 2, 3, …)
• Change ‘Start at’ to Arabic 1

Putting a Page Number in the Portrait Position on a Landscaped Page

• Put your cursor on the landscaped page so you can see both the landscaped page number and the left margin (bottom edge when viewed in portrait orientation)
• Insert a text box described in 'Cover Unwanted Page Numbers'
• Cover the page number in the landscaped position
• Remove the box outline as discussed in 'Cover Unwanted Page Numbers'
• Draw a second text box on the same page
• Drag the second text box to the left margin approximately one inch from the left edge
• Type in the correct page number
• Rotate the text in the text box by selecting ‘Text Direction’ from the Text options
• Once the page number is in the correct orientation, remove the box outline
• You may have to adjust the size of the text box and move it slightly until it is in the correct placement

Table of Contents

Manually creating a table of contents.

Includes setting tab stops and leader dot tabs

• Type in the items you want to appear in the Table of Contents. At minimum the Table of Contents must include the abstract, dedication (if present in document), acknowledgments (if present in document), vita, list of tables (if present in document), list of figures (if present in document) each chapter with the chapter title, bibliography, each appendix as a separate entry (if appendices are in your document). These items are level one in the Table of Contents. How detailed the table of contents is up to you and your committee. Subheading within these major divisions would be indented based on their level in the text of your document. Every entry in the Table of Contents must have leader dots from the end of the entry to the page number where it begins (see below)
• After the entry press the tab key once and then type the page number when the entry begins
• Select the table of contents
• Select the ‘Page Layout’ tab
• Go to the ‘Paragraph’ Box and open the dialogue box (click on the small box in the lower right corner of the box.)
• Select tabs
• Set tab stops for any sub levels within your Table of Contents by inserting the position (in inches) and clicking ‘set.’ These tabs should be left aligned. The first level of the table of contents does not need to be set as it is the left margin of the page
• Set a tab stop for the page number positions (between 5” and 5.75” is usually a good spacing for the page number placement). Leave as a left aligned tab (the left edge of the numbers will line-up) or select right aligned tab (the right edge of the numbers will line up). Select the appropriate leader dots (the periods—usually the second option). Click ‘set’
• Click ‘okay’

Word Created Table of Contents

Using styles.

Once all titles, major headings, and subtitle headings have been formatted using Styles, place the cursor on the Table of Contents page

• Select the ‘References’ tab
• Select ‘Table of Contents’
• Select the format
• The Table of Contents should generate

Not Using Styles

• Go to the first item to appear in the Table of Contents (usually ‘Abstract’)
• Highlight the title
• Select ‘Add Text’ from the Table of Contents box
• Select level

Note: if you did not use Styles marking the item for inclusion in the Table of Contents may change how it appears on the text page. Correcting the format on the text page may change how it appears in the Table of Contents

• Turn Styles on
• From Home tab, go to Styles box, click on small box in the lower right corner to open the Styles window
• Select Style to modify by hovering over the Style title with the cursor
• Click on the down arrow on the right side of the Style
• From the menu that appears select ‘Modify’
• To change the font size, add or remove bold, change color, and justification, make changes as normal in the modify box
• To change spacing above or below, click on ‘Format’ and select ‘Paragraph’
• Adjust up or down
• To remove or add accent line click on ‘Format’ and select ‘Borders’
• Select ‘No Borders’ and click ‘okay’

Dissertation and Theses

The dissertation is the hallmark of the research expertise demonstrated by a doctoral student. It is a scholarly contribution to knowledge in the student’s area of specialization. 

A thesis is a hallmark of some master’s programs. It is a piece of original research, generally less comprehensive than a dissertation and is meant to show the student’s knowledge of an area of specialization.

Still Have Questions?

Dissertations & Theses 614-292-6031 [email protected]

Doctoral Exams, Master's Examination, Graduation Requirements 614-292-6031 [email protected]

Formatting Theses & Dissertations using Word 2010: Setting Margins

• Footnotes and Endnotes
• Images, Charts, Other Objects
• Cross-References
• Applying a Style
• Modifying a Style
• Setting up a Heading 1 Example

Setting Margins

• Creating and Using Templates
• Combining Chapters
• Finalizing Without Styles
• Adding Page Numbers
• Landscape Pages
• Automatic Table of Contents and Lists
• Commenting and Reviewing
• Quick Links

General guidelines require a 1” margin on  all sides except the left, which requires a 1.5” margin.

• On the Page Layout Ribbon, in the Page Setup Group , click on the arrow below the Margins options and select Custom Margins….
• In the Page Setup dialog box, select the Margins tab, and type 1.5” into the space for the left margin and 1’ for the rest of them.
• Before closing the dialog box, make sure the Apply to: setting is set to Whole Document .

Even though general guidelines say you need a 2 or 2.5 inch margin on the top of certain pages, do not use the margins to achieve this – see below for more details.

If for whatever reason you need to change the margin for only one section, be sure the Apply to: is set to This section only . 

Two-inch Margin Using Styles

Using a Heading 1 and redefining the style create the two-inch margin required by general guidelines on the chapter titles and major headings like Dedication and Acknowledgments is often the best method.

By adding the extra space above the Heading 1, you combine the one inch margin from the document with the one inch of space on the heading to create your two inches.

Please see the Setting Up Heading 1 Example on the previous page for the step-by-step instructions.

• << Previous: Setting up a Heading 1 Example
• Next: Numbering >>
• Last Updated: Jul 18, 2024 11:16 AM
• URL: https://research.auctr.edu/dissertation

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Dissertation layout and formatting

Published on October 21, 2015 by Koen Driessen . Revised on February 20, 2019.

The layout requirements for a dissertation are often determined by your supervisor or department. However, there are certain guidelines that are common to almost every program, such as including page numbers and a table of contents.

If you are writing a paper in the MLA citation style , you can use our  MLA format guide .

Table of contents

Font, font size, and line spacing, tables and figures, referencing, paragraph marks, headers and footers, page numbering, dissertation printing.

Use a clear and professional font. Some examples include Verdana, Times New Roman, and Calibri (which is the default font in Microsoft Word). Font size is best set to 10 or 11.

In scientific articles and theses, a line spacing of 1.15 or 1.5 is generally preferred, as it makes the document more readable and enables your supervisor to post comments between the lines of text.

Prevent plagiarism. Run a free check.

With tables, the number and title should be placed above; with figures and all other illustrations, the number and title should be placed below.

Microsoft Word has a feature that can help you to automatically place these numbers and titles in the correct position. Select the graphic, right-click, and choose “Insert Caption…” In the dialogue box that appears, specify whether it is a table or figure and enter a title. Once you click “Okay,” the number and the title will be generated in the right place.

Another advantage of using this Word feature to label your graphics is that you will later be able to generate lists of tables and figures with a push of a button.

Different heading styles are frequently used to help the reader differentiate between chapters, sections, and subsections of your dissertation. For instance, you may choose to bold all chapter headings but to italicize all lower-level headings.

Once you decide on the scheme you will use, it is important that you apply it consistently throughout your entire dissertation. Using the “Styles” feature of Microsoft Word can be very helpful in this regard. After you have created a heading, just highlight it and select a style (such as Heading 1 or Heading 2) from the home tool bar. Keeping a list may help you keep track of what style to use when.

Citing sources in a correct and appropriate manner is crucial in a dissertation, as failing to do so can make you guilty of plagiarism . It is important that these references follow certain standards.

The APA standard is most commonly used. After realizing how difficult it is to create correctly formatted citations manually, we developed the APA Citation Generator  to assist you. You can use this free and simple tool to easily generate citations that follow the official APA style.

We also recommend that you use a plagiarism scanner to check for unintended plagiarism.

Using the “Show paragraph marks” feature can help you to avoid this scenario. To turn it on, click on the paragraph symbol in your home tool bar (as shown in the above illustration). A black paragraph symbol will then be shown after every paragraph and “hard return” in your document, which allows you to see how the layout is constructed.

This can be very helpful when you are trying to determine the cause of mysterious jumps and other problems.

Headers and footers can give your dissertation a very professional look. They also make it immediately clear to readers what document is before them.

A header or footer can be added by double-clicking respectively at the top or bottom of a page in your document. There are generally no firm rules about what you must include; the following are common choices:

• The name/logo of your home educational institution
• The name/logo of the company or organization where you completed a placement
• The title of your dissertation (which may be shortened if necessary)
• Page numbers

Page numbers are commonly placed in the lower right-hand corner of the page. They can easily be added by simply creating a footer. Bear in mind that a page number is usually not included on the title page of a dissertation.

• To ensure that the page numbering doesn’t start on the cover page, but the numbering begins on page 1, place the cursor on the bottom of the page where you want to start with page numbering (if you want to start on page 2, click at the bottom of the first page).
• Next go to “Page layout” and then “Breaks”. Next, choose the submenu “Next page”.
• Switch to the side, where the numbering should begin (in this case, page 2). In the edit mode of the header or footer, choose “link to previous”, after that click on “Move to footer” and click on the “Link to previous” again.
• Now, to add a page number, click on the “Insert” tab, then on the “Header and footer” group, and then click “Page number”. Now you can also choose where the page number should be (top of the page, bottom of the page or page margins) and you can choose a design.
• Finally select the option “format page number” and enter the page numbers, in what page you want the numbering to begin. After you have pressed “ok”, the page number then begins with the number from the previously selected break.

A clear and well-presented title page is a nice finishing touch for your dissertation. Certain information should be included here by default. We have prepared a separate article on title pages that includes a handy checklist you can use to make sure you don’t forget anything.

Always make sure that everything in your dissertation is in the correct order and placed in the appropriate chapter. More information on how to put your document together can be found in our article on structure a dissertation .

If you are interested in seeing how other students have tackled preparing their theses, you may find it useful to check out these dissertation examples .

The last step is usually to prepare a hardcopy of your final document. There are many issues to think about, such as whether you will make it single- or double-sided.

Before you print, however, we recommend that you check one last time that your document meets all of the below requirements!

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Driessen, K. (2019, February 20). Dissertation layout and formatting. Scribbr. Retrieved September 9, 2024, from https://www.scribbr.com/tips/dissertation-layout-and-formatting/

Is this article helpful?

Koen Driessen

What is your plagiarism score.

• Library Catalogue

Formatting your thesis: Overall layout and specifications

On this page

Formatting requirements, parts of a thesis, file format, file size, and page size, line spacing, citation style, cumulative theses, extended essays, personal information, blank pages.

The Library's Theses Office assists with formatting theses, projects and extended essays for submission to the Library. You are encouraged to use the Library's thesis template to help format your thesis. The requirements stated on this page are default settings for the thesis template

Optional pages in the thesis template may be removed if not used.

The final copy of the thesis must be converted to .pdf (PDF/A format) for submission to the Library (maximum 600 mb). See the guide  Saving your thesis in PDF/A format for instructions.

Theses must be formatted for US Letter (8.5X11) pages. Landscape 8.5X11 and 11X17 pages are permitted. Legal, A4, or other paper sizes are not permitted.

Arial is the preferred font for SFU thesis submissions. See the Thesis Template Instructions for directions to change the default template font.

Please contact the Theses Office at [email protected] if you would like to use any fonts in your thesis other than the ones recommended.

​The default template line spacing is 1.5 for text, with single-spaced block quotations.

Margins should be set to:

• 1.25" left/right
• 1" top/bottom

All pages must be numbered sequentially as outlined below, with the exception of the title page. Page numbers should appear at the bottom centre of each page, at a minimum of 0.5” from the edge of the page.

Preliminary pages of the thesis must be numbered with Roman numerals. On the first page of the main body, page numbers must restart with 1. The thesis template is preset with this numbering style.

SFU Library does not require a specific citation style. Consult your supervisor, your department’s graduate handbook, or a liaison librarian for help with determining which style is appropriate for your research.

The default formatting in the library’s thesis template may differ from some requirements of your citation style, but it is acceptable for SFU library submission.

Cumulative, or paper-based, theses must use the same general format as other submissions. Consult your supervisor or your department's graduate handbook for more information. If including published papers in a thesis, please consult the Copyright and your thesis FAQ .

Extended essays should be combined into a single document and single submission. For an example of an extended essays title page, see the Title page formatting information .

For theses written in a language other than English, the Library requires a second complete English title page and abstract. Supporting documentation must be in English.

Individual personal information must be removed from the thesis before publication, including signatures, email addresses, and phone numbers. For example, if you are including a survey instrument or consent form, your own contact information must be removed.

Blank pages in the thesis must be removed before publication.

University of South Florida

Office of Graduate Studies

Main navigation, page margins.

Page margins should be set to 1" on each side throughout the entire manuscript. All sections of the manuscript have the same margin requirements.

Ensure that content (tables, figures, any text) does not overflow into the margins.

Margins can be set in Microsoft Word using the page layout tab on the main menu (PC) or on the formatting palette (Mac). 

Do not use the indent arrows or tabs located on the ruler to set the page margin. Likewise, do not change the margins to indent text. If indentation is required within the body of the manuscript (i.e., indent of quotes, paragraphs, etc.), the indent function (arrows along the top ruler) should be used. 

Show/View Ruler

Be sure to enable ‘Rulers’ to see the margins and manage text indenting/wrapping. Use the rulers to confirm that the margins are correct.

In Word, click on the ‘View’ tab and then check the Ruler in the ‘Show’ section.

Both in Word and in Pages (Mac), the margins should show as gray shaded areas along the ruler.

Bonus Tip: Select "Ctrl + U" while in the Adobe PDF viewer to view the page Grid.

Search for books, articles, and more

Search the list of databases available through Johns Hopkins

Get started by using subject guides compiled by our librarians

Get Materials

• BorrowDirect Request books and other items from partner libraries. JHED ID required.
• Interlibrary Loan Request scanned articles, chapters, and more from non-JHU libraries. JHED ID required.
• Document Delivery via ILL Request scanned articles and chapters from JHU Libraries and the Libraries Service Center. JHED ID required.
• Journal Search Look for online journals and periodicals available from JHU libraries.
• Citation Linker Find a specific article or book by searching citation information.
• eReserves Access online articles and media reserved for courses.
• Formatting Requirements

Electronic Theses & Dissertations (ETDs)

• Submission Checklist
• Submission Deadlines

Required formatting for submission to be completed.

Elements of an Electronic Thesis or Dissertation

The most important page to get right.

• What to include
• How to format it

Download Example (PDF)

Front Matter

• Table of contents, abstract, lists, etc
• Guidelines for deciding what to include and in which order

General Formatting

• Order of required content
• Spacing and type
• PDF/A export

Annotated Title Page Example

Download Annotated Front Matter (PDF)

PDF/A Export

PDF/A is an ISO-standardized version of the Portable Document Format (PDF) specialized for the digital preservation of electronic documents. You need to save your dissertation as a PDF/A file and upload it as your official submission. For more information, see the Wikpedia article on the format.

Note for Mac users: that while you can save a Word for Windows document as a PDF/A (see below for instructions) you cannot do so directly from Word for Mac. If you are a Mac user, consider saving your Word document as a PDF/A using a Windows computer, such as at the library, or use Adobe Acrobat Pro.

Notes about PDF/A format

• you cannot include audio and video content; still images are fine
• you cannot include JavaScript or executable files
• fonts must be embedded

If you need to include audio, video, or other files, you can submit them as supplementary files. Contact us at [email protected] for more help with PDF/A or supplementary files.

Adobe Acrobat Pro

• Select “PDF Standards” in the Tools menu
• Select “Preflight” in the right hand column
• Select “PDF/A Compliance”
• Double-click “Convert to PDF/A-1b” then “Save”
• Review your document to ensure it appears as you expect it to

Word for Windows

• Select “File” then “Save as Adobe PDF”
• Make sure file type is “pdf files”
• Select “Options” and a box with “PDF Options” will open
• Check the “Create PDF/A” box, then select “OK” and “Save”
• Follow the instructions for using a LaTeX template
• The Library does not provide support for LaTeX. Access a student-created template on GitHub

Contact ETD Office

Milton S. Eisenhower Library [email protected]

ETDs on JScholarship

Electronic theses and dissertations from JHU students. Go to ETDs

JScholarship Home

Open access publications from JHU faculty and students. Visit JScholarship

Please start by reviewing the formatting requirements and submission checklist .

If you have additional questions, email [email protected] for the fastest response.

If we are unable to resolve your inquiry via email, you may request an in-person meeting. Due to the volume of ETDs, we cannot meet on deadline days, or the two days before deadlines.

Please note we do not provide formatting reviews by email, only via the submission system .

In this section

• Graduate Program-Specific Contacts
• Doctoral Dissertation Policies and Procedures
• Master’s Thesis Policies and Procedures
• Thesis and Dissertation Release and Embargo Options

Thesis and Dissertation Formatting Guidelines & Deep Blue Archiving

• Graduate Studies Forms
• Three Minute Thesis Competition
• Graduate Student Appreciation Week

The purpose of these Formatting Guidelines is to make all dissertations and theses legible, accessible, preservable, and uniform in presentation. The steps you take now to format your dissertation and thesis will improve the file for future readers.

See The Mardigian Library’s  Formatting Your Thesis or Dissertation with Microsoft Word  for video tutorials designed to help you get most of the formatting of your thesis correct the first time. It is recommended that you use the dissertation/thesis template available in this guide which has most of the guidelines already incorporated.

For questions about formatting beyond what is covered in these resources, please check with your dissertation or thesis advisor.

File Format

• Submit the dissertation or thesis as a PDF file

Structure/Accessibility

Techniques for creating accessible documents, including adding alternative text for images, can be found on this  website.

Set Document Title:  Set the document title (note: this is a document property, not the filename) as your dissertation or thesis title.

Set Document Language

Set the Language of Parts (Quotations, Sections) That Are Different from the Main Language (required if applicable)

Use Correct Headings:  Use appropriate heading levels for section and subsection titles. Use “Heading 1” for main section titles (e.g. a Chapter), “Heading 2” for subsection titles (e.g. a Chapter section), and so on.

Create Lists, Columns, and Other Structures by Using the Appropriate Structural Element.  Do not use space bar, tab, or enter to arrange text in apparent tables, lists, or columns.

Images, Figures, Tables, Media

• Include descriptive alt text for all images and figures to convey the meaning and context of a visual item in a digital setting (do not use images of tables.)
• Use at least 2-inch top margin on the Title Page.
• Use 2-inch top margin on the first page of every chapter and major section (Acknowledgements, List of Figures, Bibliography, etc.…)
• Use at least 1-inch margins (top, bottom, left, right) on all pages. 

Text, Fonts, Color, Spacing

• Use a legible font, size 12 point, black color for all body text. Recommended fonts include Times or Times New Roman (serif fonts) or Arial (sans-serif font). Images and text within images may be in color.
• Headings may be visually different than body text (bigger, bold) and no bigger than size 16 point.
• Font size for footnotes, endnotes, captions, tables, figures, and equations may be smaller than the body text and no less than 9 point.
• Text in the Front Matter that links to a location within the dissertation or thesis (from the Table of Contents, for example) should not be underlined or outlined as hyperlinks.
• Use embedded fonts to ensure all font information in your document is secured in your PDF.
• Use either 1.5-line or double-line spacing throughout for all body text. 
• Use single-line spacing for text in tables, lists, footnotes/endnotes, figure/table legends/captions, and bibliographic entries (with a blank line between each citation or entry). 

Numbering and Page Numbering

• Number chapters consecutively and name them as follows: Chapter [#] [Title of Chapter]. For example, Chapter 1 Introduction. 
• Include the chapter number and name as a heading on the first page of chapter and in the Table of Contents.
• Number all tables, figures, appendices, etc. consecutively and name them as follows: Table [#] [Caption/Title/Legend]. 
• Tables, Figures, etc. may be numbered simply using whole numbers throughout the document (Figure 1, Figure 2, Figure 3) or by combining the chapter number and table, figure, etc. number per chapter (Figure 2.1, Figure 2.2, Figure 3.1). Choose one system from an appropriate style guide and use it consistently.
• Include a List of Figures, List of Tables, etc. in the front matter if the dissertation or thesis includes more than one figure, table, illustration, appendix, etc. (required if applicable)
• List of Figures (or List of Tables, List of Illustrations, List of Appendices, etc.) includes the title of each, its caption/title/legend, and page number on which it begins.
• Include page numbers in the front matter, centered in the footer, using lowercase Roman numerals, beginning on page ii (the first page after the Identifier/Copyright page).
• Include page numbers in the dissertation text and following sections, centered in the footer, using Arabic numerals, beginning on page 1.

Components of the Dissertation and Thesis

Include the following components, in the following order. All required components must be included.

Use the page numbering conventions given below. Every section below starts on a new page with 2-inch top margin.

Title Page (required)

No page number. No page count.

• See the section below for details of component requirements.

Frontispiece (Illustration or Epigraph) (optional)

Identifier/Copyright Page (required)

• No page number. Start page count here.
• See section below for details of component requirements.

Dedication (optional)

• Page numbers required. Start lowercase Roman numerals (starting with ii) here.
• Acknowledgments (optional)

Page numbers required. Lowercase Roman numerals.

Preface (optional)

Table of Contents (required)

List of Tables, List of Figures, etc. (required if applicable)

• List of Tables required if there is more than one table, etc.

List of Illustrations/Photos (required if applicable)

List of Appendices (required if applicable)

List of Abbreviations, List of Acronyms, List of Symbols (optional)

Abstract (required)

Dissertation or Thesis Text (required)

• Page numbers required. Start Arabic numerals here.
• Appendices (optional)

Bibliography or Reference section(s). (required)

Page numbers required. Arabic numerals. Insert at the end of each chapter, or the end of the dissertation/thesis, in the format preferred by the discipline.

Title Page Components

Include the following components on the title page, in the following order. Begin each item on a new line.

• At least 2 inch top margin on Title Page. 
• Complete dissertation  or master’s thesis title, centered, and capitalized in title case. 
• Your author name should match your legal name or preferred name in Wolverine Access
• You may use initial(s) for middle name(s).
• The following text, including line breaks, centered and single line-spaced. 

A dissertation (thesis) submitted in partial fulfillment of the requirements for the degree of Name of Degree (Name of Program) in The University of Michigan-Dearborn YEAR

• The text, “Doctoral Committee  or Master’s Thesis Committee:” left justified. 
• List chair or co-chairs first (in alphabetical order by surname if more than one) with “Chair” or “Co-Chair” after their titles and names.
• List other committee members in alphabetical order, by last name.
• Professor rank (e.g., Professor, Associate Professor, Assistant Professor, Emeritus Professor) or title (e.g., Dr.)
• Complete full name
• Affiliation, if not affiliated with University of Michigan (e.g., name of university, college, corporation, or organization)

Identifier/Copyright Page Components

Include the following components on the identifier/copyright page, in the following order. Begin each item on a new line, centered.

• Your full legal name (Required)
• Your @umich.edu email address (Required)
• Your ORCID iD (required only for PhD candidates)

ORCID iD is a unique digital identifier that you control and that distinguishes you from other researchers.

• ORCID iD profile URL (Recommended)
• Copyright notice. (Recommended)

Copyright notice notifies readers that you hold the copyright to this work and when it was established.

Use the following format: © Full Name YEAR

Final Formatting Checks

Before submission, double-check the following:

• All numbered series (pages, chapters, tables, figures, etc.) are consistently formatted and consecutive throughout the document.
• All entries in the table of contents and lists match contents as titled/ordered in the dissertation text.
• References/Bibliography entries are complete and match the formatting preference of your discipline.

Thesis or Dissertation Embargo

The thesis or dissertation is submitted as public evidence of your scholarly research and accomplishment. A thesis or dissertation and abstract is normally made publicly available upon degree conferral when it is deposited electronically in Deep Blue. If a student wishes to postpone public release of the final product, also called an embargo, the student should discuss this option with his or her faculty advisor. It has always been the university's expectation that every dissertation and abstract will be released upon conferral of the degree. Only in specific circumstances may release of a thesis or dissertation be deferred, and then only for a limited period of time. The student is responsible for requesting an embargo.

Embargo forms can be found at:  "Thesis and Dissertation Release and Embargo Options”

Deep Blue Archiving 

Required for doctoral dissertations and highly recommended for Master’s Thesis. The final pdf document of your dissertation or thesis must be submitted electronically to the Mardigian Library. This digital PDF will be the copy of record and will be archived in  Deep Blue . Deep Blue is a digital repository that is part of the University of Michigan Library. 

To submit your document, you need to provide:

• Your ORCID iD  
• Keywords that describe the subject, concepts, theories, and methods used in your document, to help others find and retrieve your document
• A copy of your thesis or dissertation in PDF format
• Optional – up to two supplementary files (no larger than 50 MB each), such as an audio file, spreadsheet, or a software program

To maintain the usability and appearance of your document, please review the  Best Practices for Producing High Quality PDF Files , available on Deep Blue.

If you have supplemental materials (such as data) that should also be made publicly available and associated with your dissertation or thesis, consider reaching out to  [email protected]  for help determining whether these should be deposited into one of the Deep Blue repositories.

Once your document is submitted to Deep Blue by the library, you will receive an email containing the DOI and a URL to access the document. It will also be added to the Mardigian Library catalog and made available on Google Scholar. If no embargo is requested, it may take three to four weeks for your document to become available.

Submit Final Thesis/Dissertation to Deep Blue

More support.

• Library Guide to  Formatting Your Thesis or Dissertation with Microsoft Word  and Video Tutorials.
• UM IT accessibility guide for  creating accessible documents .
• Guide for  embedding all fonts in PDFs generated with LaTeX or PDFLaTeX .

Contact your  subject librarian  for assistance on a wide range of topics including literature searching, citation management, and much more.

Download the Formatting Checklist

Office of graduate studies.

/images/cornell/logo35pt_cornell_white.svg" alt="page margins thesis"> Cornell University --> Graduate School

Required sections, guidelines, and suggestions.

Beyond those noted on the Formatting Requirements page , the Graduate School has no additional formatting requirements. The following suggestions are based on best practices and historic requirements for dissertations and theses but are not requirements for submission of the thesis or dissertation. The Graduate School recommends that each dissertation or thesis conform to the standards of leading academic journals in your field.

For both master’s and doctoral students, the same basic rules apply; however, differences exist in some limited areas, particularly in producing the abstract and filing the dissertation or thesis.

• Information in this guide that pertains specifically to doctoral candidates and dissertations is clearly marked with the term “ dissertation ” or “ doctoral candidates .”
• Information pertaining specifically to master’s candidates and theses is clearly marked with the term “ thesis ” or “ master’s candidates .”
• All other information pertains to both.

Examples of formatting suggestions for both the dissertation and thesis are available as downloadable templates .

Required? Yes.

Suggested numbering: Page included in overall document, but number not typed on page.

The following format for your title page is suggested, but not required.

• The title should be written using all capital letters, centered within the left and right margins, and spaced about 1.5 inches from the top of the page. (For an example, please see the template .)
• Carefully select words for the title of the dissertation or thesis to represent the subject content as accurately as possible. Words in the title are important access points to researchers who may use keyword searches to identify works in various subject areas.
• Use word substitutes for formulas, symbols, superscripts, Greek letters, etc.
• Below the title, at the vertical and horizontal center of the margins, place the following five lines (all centered):

Line 1: A Dissertation [or Thesis]

Line 2: Presented to the Faculty of the Graduate School

Line 3: of Cornell University

Line 4: in Partial Fulfillment of the Requirements for the Degree of

Line 5: Doctor of Philosophy [or other appropriate degree]

• Center the following three lines within the margins:

Line 2: Primary or Preferred Name [as registered with the University Registrar’s Office and displayed in Student Center]

Line 3: month and year of degree conferral [May, August, December; no comma between month and year]

Copyright Page

Suggested numbering: Page included in overall document, but number not typed on page

The following format for your copyright page is suggested, but not required.

• A notice of copyright should appear as the sole item on the page centered vertically and horizontally within the margins: © 20__ [Primary or Preferred Name [as registered with the University Registrar’s Office]. Please note that there is not usually a page heading on the copyright page.
• The copyright symbol is a lowercase “c,” which must be circled. (On Macs, the symbol is typed by pressing the “option” and “g” keys simultaneously. If the font does not have the © symbol, type the “c” and circle it by hand. On PCs, in the insert menu, choose “symbol,” and select the © symbol.)
• The date, which follows the copyright symbol, is the year of conferral of your degree.
• Your name follows the date.

Required?  Yes.

Suggested numbering: Page(s) not counted, not numbered

Abstract formats for the doctoral dissertation and master’s thesis differ greatly. The Graduate School recommends that you conform to the standards of leading academic journals in your field.

Doctoral candidates:

• TITLE OF DISSERTATION
• Student’s Primary or Preferred Name, Ph.D. [as registered with the University Registrar’s Office]
• Cornell University 20__ [year of conferral]
• Following the heading lines, begin the text of the abstract on the same page.
• The abstract states the problem, describes the methods and procedures used, and gives the main results or conclusions of the research.
• The abstract usually does not exceed 350 words in length (about one-and-one-half correctly spaced pages—but not more than two pages).

Master’s candidate:

• In a thesis, the page heading is simply the word “ABSTRACT” in all capital letters and centered within the margins at the top of the page. (The thesis abstract does not display the thesis title, author’s name, degree, university, or date of degree conferral.)
• The abstract should state the problem, describe the methods and procedures used, and give the main results or conclusions.
• The abstract usually does not exceed 600 words in length, which is approximately two-and-one-half to three pages of correctly spaced typing.
• In M.F.A. theses, an abstract is not required.

Biographical Sketch

Suggested numbering: iii (may be more than one page)

• Type number(s) on page(s).

The following content and format are suggested:

• The biographical sketch is written in third-person voice and contains your educational background. Sometimes additional biographical facts are included.
• As a page heading, use “BIOGRAPHICAL SKETCH” in all capital letters, centered on the page.
• Number this page as iii.

Required? Optional.

Suggested numbering: iv (may be more than one page)

The dedication page is not required and can contain whatever text that you would like to include. Text on this page does not need to be in English.

Acknowledgements

Suggested numbering: v (may be more than one page)

The following content and format are suggested, not required.

• The acknowledgements may be written in first-person voice. If your research has been funded by outside grants, you should check with the principal investigator of the grant regarding proper acknowledgement of the funding source. Most outside funding sources require some statement of acknowledgement of the support; some also require a disclaimer from responsibility for the results.
• As a page heading, use “ACKNOWLEDGEMENTS” in all capital letters, centered on the page.

Table of Contents

Suggested numbering: vi (may be more than one page)

The following are suggestions.

• As a page heading, use “TABLE OF CONTENTS” in all capital letters and centered on the page.
• List the sections/chapters of the body of the dissertation or thesis. Also, list preliminary sections starting with the biographical sketch. (Title page, copyright page, and abstract are not listed.)
• For theses and dissertations, the conventional format for page numbers is in a column to the right of each section/chapter title. The first page of each chapter/section is stated with a single number. Table of contents usually do not include a range of page numbers, such as 7-22.
• The table of contents is often single-spaced.

Two-Volume Theses or Dissertations

If the dissertation or thesis consists of two volumes, it is recommended, but not required, that you list “Volume II” as a section in the table of contents.

List of Figures, Illustrations, and Tables

Suggested numbering: vii (may be more than one page)

• If included, type number(s) on page(s).

As described in the formatting requirements above, figures and tables should be consecutively numbered. The Graduate School recommends that you conform to the styles set by the leading academic journals in your field. The items below are formatting suggestions based on best practices or historic precedents.

Table of contents format:

• As a page heading, use “LIST OF FIGURES,” “LIST OF ILLUSTRATIONS,” or “LIST OF TABLES” in all capital letters, centered on the page.
• There should be separate pages for “LIST OF FIGURES,” “LIST OF ILLUSTRATIONS,” or “LIST OF TABLES” even if there is only one example of each.
• The list should contain enough of the titles or descriptions so readers can locate items using the list. (It may not be necessary to include entire figure/illustration/table captions.)
• The list should contain the page number on which each figure, illustration, or table is found, as in a table of contents.
• The list of figures/illustrations/tables may be single-spaced.

Page format:

• Figures/illustrations/tables should be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or placed directly into the text. If a figure/illustration/table is placed directly into the text, text may appear above or below the figure/illustration/table; no text may wrap around the figure/illustration/table.
• If a figure/illustration/table appears on a page without other text, it should be centered vertically within the page margins. Figures/illustrations/tables should not be placed at the end of the chapter or at the end of the dissertation or thesis.
• Figure/illustration/table numbering should be either continuous throughout the dissertation or thesis, or by chapter (e.g. 1.1, 1.2; 2.1, 2.2, etc.). The word “Figure,” “Illustration,” or “Table” must be spelled out (not abbreviated), and the first letter must be capitalized.
• A caption for a figure/illustration should be placed at the bottom of the figure/illustration. However, a caption for a table must be placed above the table.
• If the figure/illustration/table, not including the caption, takes up the entire page, the figure/illustration/table caption should be placed alone on the preceding page and centered vertically and horizontally within the margins. (When the caption is on a separate page, the List of Figures or List of Illustrations or List of Tables can list the page number containing the caption.)
• If the figure/illustration/table, not including the caption, takes up more than two pages, it should be preceded by a page consisting of the caption only. The first page of the figure/illustration/table must include the figure/illustration/table (no caption), and the second and subsequent pages must also include, at the top of the figure/illustration/table, words that indicate its continuance—for example, “Figure 5 (Continued)”—and on these pages the caption is omitted.
• If figures/illustrations/tables are too large, they may be reduced slightly so as to render a satisfactory product or they must either be split into several pages or be redone. If a figure/illustration/table is reduced, all lettering must be clear, readable, and large enough to be legible. All lettering, including subscripts, must still be readable when reduced 25% beyond the final version. All page margin requirements must be maintained. Page numbers and headings must not be reduced.
• While there are no specific rules for the typographic format of figure/illustration/table captions, a consistent format should be used throughout the dissertation or thesis.
• The caption of a figure/illustration/table should be single-spaced, but then captions for all figures/illustrations/tables must be single-spaced.
• Horizontal figures/illustrations/tables should be positioned correctly—i.e., the top of the figure/illustration/table will be at the left margin of the vertical page of the dissertation or thesis (remember: pages are bound on the left margin). Figure/illustration/table headings/captions are placed with the same orientation as the figure/illustration/table when they are on the same page as the figure/illustration/table. When they are on a separate page, headings and captions are always placed in vertical orientation, regardless of the orientation of the figure/illustration/table. Page numbers are always placed as if the figure/illustration/table was vertical on the page.

Photographs should be treated as illustrations. To be considered archival, photographs must be black-and-white. (If actual color photographs are necessary, they should be accompanied by black-and-white photographs of the same subject.) Color photos obtained digitally do not need to be accompanied by a black-and-white photograph. Make a high-resolution digital version of each photograph and insert it into your electronic document, following the guideline suggestions for positioning and margins.

Optional Elements

List of abbreviations.

As a page heading, use “LIST OF ABBREVIATIONS” in all capital letters, centered on the page.

List of Symbols

As a page heading, use “LIST OF SYMBOLS” in all capital letters, centered on the page.

Suggested numbering: xi (may be more than one page)

As a page heading, use “PREFACE” in all capital letters, centered on the page.

Body of the Dissertation or Thesis: Text

Suggested numbering: Begin page number at 1

• Text (required)
• Appendix/Appendices (optional)
• Bibliography, References, or Works Cited (required)

Please note that smaller font size may be appropriate for footnotes or other material outside of the main text. The following suggestions are based on best practice or historic precedent, but are not required.

• Chapter headings may be included that conform to the standard of your academic field.
• Textual notes that provide supplementary information, opinions, explanations, or suggestions that are not part of the text must appear at the bottom of the page as footnotes. Lengthy footnotes may be continued on the next page. Placement of footnotes at the bottom of the page ensures they will appear as close as possible to the referenced passage.

Appendix (or Appendices)

An appendix (-ces) is not required for your thesis or dissertation. If you choose to include one, the following suggestions are based on best practice or historic precedent.

• As a page heading, use “APPENDIX” in all capital letters, centered on the page.
• Place in an appendix any material that is peripheral, but relevant, to the main text of the dissertation or thesis. Examples could include survey instruments, additional data, computer printouts, details of a procedure or analysis, a relevant paper that you wrote, etc.
• The appendix may include text that does not meet the general font and spacing requirements of the other sections of the dissertation or thesis.

Bibliography (or References or Works Cited)

A bibliography, references, or works cited is required for your thesis or dissertation. Please conform to the standards of leading academic journals in your field.

• As a page heading, use “BIBLIOGRAPHY” (or “REFERENCES” or “WORKS CITED”) in all capital letters, centered on the page. The bibliography should always begin on a new page.
• Bibliographies may be single-spaced within each entry but should include 24 points of space between entries.

Suggested numbering: Continue page numbering from body

If you choose to include a glossary, best practices and historic precedent suggest using a page heading, use “GLOSSARY” in all capital letters, centered on the page.

Suggested numbering: Continue page numbering from glossary

If you choose to include one, best practices and historic precedent suggest using a page heading, use “INDEX” in all capital letters, centered on the page.

Font Samples

Sample macintosh fonts.

• Palatino 12
• Garamond 14
• New Century School Book
• Helvetica 12 or Helvetica 14
• Times New Roman 12
• Times 14 (Times 12 is not acceptable)
• Symbol 12 is acceptable for symbols

Sample TeX and LaTeX Fonts

• CMR 12 font
• Any font that meets the above specifications

Sample PC Fonts

• Helvetica 12

Atrium Institutional Repository

• Submitting Items to the Atrium
• Thesis & Dissertation Submission Guide
• Accessible Theses
• Linking ORCID to your Atrium Account

About these tutorials

Why is page numbering important, how do i add page numbers to my thesis, accessibility statement.

• PC Word Tutorials
• Mac Word Tutorials

Ask Us: Chat, email, visit or call

Get assistance

The library offers a range of helpful services.  All of our appointments are free of charge and confidential.

• Book an appointment

These tutorials were developed to provide step-by-step instructions to assist graduate students with using the built in tools in MS Word to create a thesis page numbering system that meets the Office of Graduate and Postdoctoral Studies’ (OGPS)  thesis page numbering  requirements.

The guide assumes you are starting with a MS Word document that does not have any page numbering applied. If you are working with a preformatted Word document such as the ETD monograph or manuscript templates , you can use these instructions to help you edit your page numbering to meet OGPS’ general page formatting requirements as required.

Please note that the word ‘thesis’ is used to refer to both a masters thesis and a doctoral dissertation. Additionally, this guide only focusses on one aspect of the thesis formatting requirements; please refer to the OGPS’ Thesis Completion guide for detailed information about formatting requirements.

Note: Graduate students commonly request support for thesis page numbering, however, neither the OGPS nor the library are able to provide one-on-one thesis formatting support.

The OGPS has general format requirements for theses to ensure a consistent and professional look to theses created at the U of G. The design and format of your thesis should reflect the hard work you, the graduate student, has put into writing it. 

When reviewing theses submitted for inclusion in the Atrium , the OGPS sees the following common page numbering errors made by students. These errors will result in the OGPS having to reject the thesis submission for correction and resubmission: 

• Using the incorrect page numbering system in the front, body and back matter of the thesis. 
• Forgetting to suppress the page number from displaying on the title page and abstract page(s). 

Your thesis must have: 

• All front matter (i.e., everything from the title page to the list of appendices) pages numbered using consecutive Roman numerals (e.g., iii, iv, v, etc.). 
• All body and back matter (e.g., research chapters, bibliography, appendices) pages numbered using consecutive Arabic numbers (e.g., 1, 2, 3, etc.) with the first page of the body text starting at page number “1”. 
• Page numbers located in the header or footer of the page. 

To do this, make use of the insert page number functionality in MS Word. This tool allows you to select a numbering system (i.e., Roman numerals) and the location on the page where the numbers will be displayed.

These tutorials have been created and tested with accessibility in mind and meets WCAG 2.2 AA compliance. To optimize the user experience, we do recommend that you access the interactive portions of the tutorial on larger resolution screens, such as a laptop or desktop monitor. Please  contact the library  if you encounter any barriers

These tutorials were created using Microsoft Office LTSC Professional Plus 2021, Word Version 2108. 

• PC Tutorial 1: Inserting Roman numeral page numbers
• PC Tutorial 2: Supressing page numbers on the title page and one-paged abstract
• PC Tutorial 3: Suppressing page numbers on a two-paged abstract
• PC Tutorial 4: Adding Arabic numeral page numbers

These tutorials were created using Microsoft Word for Mac (version 16.88).

• Mac Tutorial 1: Inserting Roman numeral page numbers
• Mac Tutorial 2: Supressing page numbers on a one-paged abstract
• Mac Tutorial 3: Suppressing page numbers on a two-paged abstract
• Mac Tutorial 4: Adding Arabic numeral page numbers
• << Previous: Linking ORCID to your Atrium Account
• Next: PC Word Tutorials >>
• Last Updated: Sep 13, 2024 11:41 AM
• URL: https://guides.lib.uoguelph.ca/atrium

Suggest an edit to this guide

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Amazon: Oracle Partnership Highlights Margin Expansion Potential

• AMZN's retail segment faces growth and profit uncertainties.
• However, its recently announced partnership with Oracle highlights AWS' leading position and AI opportunities.
• Its AWS segment features a far higher margin than retail (~35% vs. ~4.5% in my estimate).
• AWS acceleration and AI opportunities, as accentuated by the ORCL-AWS partnership, thus can both drive rapid EPS growth, and also expand margins considerably.
• Looking for a portfolio of ideas like this one? Members of Envision Early Retirement get exclusive access to our subscriber-only portfolios. Learn More »

AMZN stock: previous thesis and new developments

I last wrote on Amazon stock ( NASDAQ: AMZN ) a bit more than a month ago, shortly after the release of its Q2 earnings report (“ER”). As you can see from the screenshot below, that article was titled "Amazon Q2: Be Greedy When Others Are Fearful”. As the title already gave away, the article was a review of its ER and argued for a buy rating amid the selloff following its ER. Quote:

The market's fear over a potential AI bubble certainly has good reasons. However, the fear is overblown in the case of Amazon.com , Inc. judging by its Q2 results. In Q2, Amazon continued to show the superiority of its e-commerce, well-balanced revenue sources, and differentiating services/products. The recent selloff has offered a wide margin of safety to buy Amazon shares.

Seeking Alpha

Since that writing, besides the stock price changes (more than 14%), there have been a few new developments surrounding the company. The most important one in my view was the strategic partnership AMZN and Oracle ( ORCL ) jointly announced a few days ago. More specifically,

Oracle and Amazon Web Services, Inc. (AWS) announced on September 9, 2024, the launch of Oracle Database@AWS, a new offering that allows customers to access Oracle Autonomous Database on dedicated infrastructure and Oracle Exadata Database Service within AWS. Oracle Database@AWS will provide customers with a unified experience between Oracle Cloud Infrastructure (OCI) and AWS, offering simplified database administration, billing, and unified customer support. In addition, customers will have the ability to seamlessly connect enterprise data in their Oracle Database to applications running on Amazon Elastic Compute Cloud (Amazon EC2), AWS Analytics services, or AWS’s advanced artificial intelligence (AI) and machine learning (ML) services, including Amazon Bedrock.

In the remainder of this article, I will argue that this partnership highlights the leadership position of AWS in the burgeoning cloud space, a position that allows AMZN to not only grow its EPS at a rapid pace but more importantly also to expand its profit margins considerably.

AMZN stock: EPS growth outlook

First, let’s look at EPS growth potential. As you can see from the following consensus estimates , the market expects its EPS to rapidly grow from $4.72 in FY 2024 to $10.86 in 5 years. Such growth translates into an annual growth rate of over 18% CAGR.

Thanks to its AWS (together with other catalysts, as to be detailed later), I consider such a projection highly plausible. In recent quarters, ASW segment revenue has been growing at similar rates. AWS has maintained its market-leading share, thanks to custom silicon solutions, highly sought developer services (led by Sagemaker), AI and machine learning capabilities, large partnerships, and trusted security. The above partnership with ORCL just added another testament – a very sizable one - to these strategic strengths.

Also note that under this growth scenario, the implied P/E ratio would be only about 16.9x in five years at the current stock prices ($184 as of this writing). Even at its 52-week peak price of around $200, the implied P/E is still only about 18.4x. Finally, I don’t recommend investors rely solely on accounting P/E ratios for the evaluation of high-growth companies. These companies invest heavily in growth CAPEX, and thus their true owner’s earnings are far higher than the accounting EPS.

Next, I will argue that such EPS growth and P/E multiples understate the attractiveness of stock, as they do not reflect the improvement in the QUALITY of its earnings.

Source: author based on Seeking Alpha data.

AMZN stock: margin expansion potential

The next chart shows the consensus estimates for its topline growth. As seen, the market expects the revenues to grow from $635 billion in FY 2024 to $943 billion in FY 2028, translating into an annual growth rate of 8.2% CAGR in the next five years. This is significantly below the above-projected growth rate for its EPS. The discrepancy means that the margin is likely to expand substantially. Indeed, under the assumption of a fixed number of outstanding shares (taken to be 10.2 billion shares), I estimated the profit margin implied by the consensus EPS and revenue forecasts. As seen in the last column, its profit margin is projected to expand from 7.73% to almost 12% in the next five years.

Similar to my view on the EPS growth curve, I consider the margin expansion to be also plausible. To better contextualize things, the following chart shows its quarterly profit margin over the long term. As seen, the company has become profitable (in accounting terms) around 2015~2016. Since then, its profit margin has been on an overall expanding trend, except for the brief disruption by the pandemic. Currently, the profit margin is about 9.11% as of the latest quarterly, almost fully recovered to the pre-pandemic level.

Dissecting the data a bit closer, the margin for its AWS segment is far above the company-wide level. My estimate for its AWS margin is above 35% for FY 2024 (and about 4.5% for its retail segment, more on this later). Given the AWS acceleration and AI opportunity as highlighted by the ORCL partnership, I certainly expect an increasing role of AWS in its future profit mix and consequently a higher aggregated margin for the whole company.

Other risks and final thoughts

In terms of downside risks, the retail business continues to face growth and profitability uncertainties in my view. In contrast to the rapid growth of the AWS business, I see more demand issues (i.e. slower consumer spending) that might overshadow the retail segment. Although, the company has invested heavily to improve its retail operations’ efficiency and profitability in recent years. These efforts have boosted profitability markedly, and its retail operating margins climbed to around 5.0% in recent quarters. Going forward, I expect the company to keep investing in the retail side to expand its services (such as same-day delivery) and improve operations, especially overseas. I am optimistic that these investments to bear fruit in the long term, but they may create drags on near-term profitability.

All told, my verdict is that the positives far outweigh the negatives under the current conditions. The top positive on my list is the potential for AWS acceleration and AI opportunities, as accentuated by the recently announced ORCL-AWS partnership. I expect these catalysts to not only drive rapid earnings growth but also improve margins considerably in the next few years.

As you can tell, our core style is to provide actionable and unambiguous ideas from our independent research. If your share this investment style, check out Envision Early Retirement. It provides at least 1x in-depth articles per week on such ideas.

We have helped our members not only to beat S&P 500 but also avoid heavy drawdowns despite the extreme volatilities in BOTH the equity AND bond market.

Join for a 100% Risk-Free trial and see if our proven method can help you too.

This article was written by

Envision Research, aka Lucas Ma, has over 15+ years of investment experience and holds a Masters with in Quantitative Investment and a PhD in Mechanical Engineering with a focus on renewable energy, both from Stanford University. He also has 30+ years of hands-on experience in high-tech R&D and consulting, housing sector, credit sector, and actual portfolio management.

He leads the investing group Envision Early Retirement along with Sensor Unlimited where they offer proven solutions to generate both high income and high growth with isolated risks through dynamic asset allocation. Features include: two model portfolios - one for short-term survival/withdrawal and one for aggressive long-term growth, direct access via chat to discuss ideas, monthly updates on all holdings, tax discussions, and ticker critiques by request.

Analyst’s Disclosure: I/we have no stock, option or similar derivative position in any of the companies mentioned, and no plans to initiate any such positions within the next 72 hours. I wrote this article myself, and it expresses my own opinions. I am not receiving compensation for it (other than from Seeking Alpha). I have no business relationship with any company whose stock is mentioned in this article.

Seeking Alpha's Disclosure: Past performance is no guarantee of future results. No recommendation or advice is being given as to whether any investment is suitable for a particular investor. Any views or opinions expressed above may not reflect those of Seeking Alpha as a whole. Seeking Alpha is not a licensed securities dealer, broker or US investment adviser or investment bank. Our analysts are third party authors that include both professional investors and individual investors who may not be licensed or certified by any institute or regulatory body.

Recommended For You

About amzn stock.

More on AMZN

Related stocks.

Trending Analysis

Trending news.